A、 The General Aviation Manufacturers Association compiled this specification to guide the manufacturers of the aircraft ,engine and component developing their Continuous Airworthiness Program Inspection Documents.
B、 The Continuous Airworthiness Program Inspection Documents prepared by the manufacturers of the aircraft ,engine and component was guided by the General Aviation Manufacturers Association.
C、 This specification was developed by the General Aviation Manufacturers Association as guidance for airplanes, engine and component manufacturers in preparing Continuing Airworthiness Program Inspection Documents .
答案:C
A、 The General Aviation Manufacturers Association compiled this specification to guide the manufacturers of the aircraft ,engine and component developing their Continuous Airworthiness Program Inspection Documents.
B、 The Continuous Airworthiness Program Inspection Documents prepared by the manufacturers of the aircraft ,engine and component was guided by the General Aviation Manufacturers Association.
C、 This specification was developed by the General Aviation Manufacturers Association as guidance for airplanes, engine and component manufacturers in preparing Continuing Airworthiness Program Inspection Documents .
答案:C
A. If the wheel temperature reaches as high as 177 deg., the core of safety plug shears off and the tire slips.
B. If the wheel temperature increases to more than 177 deg., the core of the fusible plug melts and the tire deflates.
C. The core of the filter element melts once the wheel temperature is above 177 deg., causing the tire to deflate.
A. 记录对蒙皮表面进行的所有修理。
B. 记录对蒙皮封严进行的所有修理。
C. 记录对蒙皮损伤进行的所有处理。
A. 该扭力轴无法向内侧旋转,因此在拆下前,应先拆下外旋扭力轴。
B. 禁止将该扭力轴向内侧移动。因此,在拆下前,应先拆下外侧扭力轴。
C. 该扭力轴不能向内侧移动,因此在拆下之前,应先拆下外侧扭力轴。
A. “飞机性能”中的每一项均应对与数据相关的重要条件进行说明。
B. 每一项飞机性能都包含对重要条件和数据的说明。
C. “飞机性能”中的每一条目均应对数据及其重要条件之间的关联性进行说明。
A. This program is partially important to type B parts.
B. This procedure is of particular importance to type B parts.
C. This procedure is not especially important to type B parts.
A. A towel is not used to dry the surface.
B. Use a towel to dry the surface.
C. The surface is dried without a towel.
A. 控制组件的出口压力值,否则它不能稳定在正确压力范围。
B. 输出控制组件的压力,该组件不能稳定在正确压力范围。
C. 控制组件出口压力值不能稳定在正确压力范围。
A. 维修这个组件需要校准过的工具。
B. 安装这个组件需要专用工具。
C. 组件的安装需要精确的工具。
A. 本节必须规定型号合格证所要求的每一次强制更换时间,结构检查间隔,以及相关的结构检查程序。
B. 本节必须规定每一次强制更换时间,结构检查间隔,和机型证书所要求的相关的结构检查程序。
C. 本节必须规定部件更换的时间,结构检查时间,和相关的结构检查程序所需的型号合格证。
A. 在此推荐清单中,更换部件对于起落架收放系统和其相关的指示系统来讲是不合理的。
B. 在此推荐清单中,起落架收放系统和适用的指示系统没有可更换的部件。
C. 此推荐清单不能用于起落架放下系统部件更换但适用于指示系统。