43.An architect is reviewing a physical storage design. The customer has specified that a new active-passive based storage array will be used to provide storage for the vSphere clusters.
Which configuration should for the architect recommended?

87.During a requirements gathering workshop, the customer provides the following information:

A. 　 Use Route Based on Physical NIC Load

B. 　 Use Network I/O Control with Shares.

C. 　 Use Network I/O Control with Reservation.

D. 　 Use Link Aggregation Control Protocol (LACP).

E. 　 Use Network I/O Control with Limits.

76.A customer has a database cluster with 40/60 read/write ratio and a high IOPs requirement with no contention on an all-flash vSAN cluster.
Which two storage settings should be configured for best performance? Choose two.

A. 　 IOPs limits enabled

B. 　 RAID 1

C. 　 Deduplication and Compression disabled

D. 　 RAID 5/6

E. 　 Deduplication and Compression enabled

57. An architect is tasked with designing a new VMware software-defined data center ( ) using VMware vSAN. The architect uses a storage assessment tool to determine the storage requirements for the new vSAN cluster. The new SDDC is going to be deployed into the existing data center and must be connected to a shared core network switch.
The architect decides to use vSAN ReadyNodes with the following configuration:
Two disk groups with:
- Write Intensive NVMe 800 GB drive for cache.
- Four 3.84 TB Mixed Use NVMe for capacity.

A. 　 The number of 10 GbE capable ports in the vSAN ReadyNode

B. 　 The use of vSAN ReadyNodes

C. 　 The existing network is 10 GbE capable

D. 　 The use of NVMe drives for cache and capacity

27.The Chief Operating Officer ( ) at an organization raises concerns that their virtual infrastructure environment is vulnerable. Recently, a security-related issue with a virtual machine caused all management services to become unavailable. No budget is available in the short term for additional platform investment.

A. 　 The virtual infrastructure environment must connect application virtual machines and management services to new physical network switches

B. 　 The virtual infrastructure environment must connect application virtual machines and management services to separate distributed virtual switches (DVS)

C. 　 The virtual infrastructure environment must connect application virtual machines and management services to separate VLANs

D. 　 The virtual infrastructure environment must connect management services to a vSphere standard switch (VSS)

51.An architect has 50 ESXi hosts to deploy and DHCP servers are not allowed on any network.
Which automated host deployment method should the architect use?

A. 　 Stateless vSphere Auto Deploy

B. 　 Stateful vSphere Auto Deploy

C. 　 Scripted installation

D. 　 Interactive installation

19.During a requirements gathering workshop, the customer’s Chief Information Security Office ( CISO) provides the following requirements that are pertinent to the design of a new vSphere environment:All operating system critical patches must be installed within 24 hours of release;All virtual machine templates must be updated every three months in line with company policy.

Which requirement classification is being gathered for the design documentation?

A. 　 Security

B. 　 Manageability

C. 　 Recoverability

D. 　 Availability

53.An architect is preparing a design for a customer. Based on requirements, the architect recommends an HCI-based infrastructure with all-flash architecture. During the assessment, it is confirmed that the network throughput generated by virtual machines does not exceed 150 Mb/s.
What is the minimum number and type of network adapters in each server that the architect can recommend to ensure requirements are met and there is no single point of failure?

A. 　 Two 1 GbE network adapters per server

B. 　 Four 1 GbE network adapters per server

C. 　 Four 10 GbE network adapters per server

D. 　 Two 10 GbE network adapters per server

40.The architect for a large enterprise is tasked with reviewing a proposed design created by a service partner.
Which design elements are expected to be detailed within the physical design section of the
documentation?

A. 　 A design diagram illustrating the configuration and specific attributes, such as IP addresses

B. 　 A list of requirements, constraints, and risks

C. 　 A solution architecture diagram with the components and data flow

D. 　 An entity relationship diagram describing upstream and downstream dependencies for specific service components

16.An architect is designing a solution for an environment with two types of resource profiles that must be virtualizeD、 The first type consists of Tier 1 virtual machines that are disk I/O intensive, but do NOT require high CPU or memory. The second type consists of Tier 2 virtual machines that require a lower CPU and memory allocation and have minimal disk I/O.
Which design recommendation should the architect make for distributing the resource profiles?

A. 　 Separate the two resource profiles into two clusters. The Tier 1 cluster will have fast storage while the Tier 2 cluster will not.

B. 　 Run both resource profiles on the same cluster with the same host hardware platform.

C. 　 Separate the two resource profiles into two clusters. The Tier 2 cluster will have faster CPU and more memory while the Tier 1 cluster will have slower CPU and less memory but more disk space

D. 　 Run both resource profiles on the same cluster with host hardware that has fast CPU, large amounts of memory, and the fastest storage platform.

59.Which two of the listed requirements would be classified as performance non-functional requirements?Choose two.

A. 　 The vSphere platform must be able to provide a recovery time objective of 30 minutes

B. 　 The vSphere platform must be able to provide a minimum throughput of 400 MB/s

C. 　 The vSphere platform must be able to provide N+1 redundancy

D. 　 The vSphere platform must be able to provide a maximum read latency of 15 ms

E. 　 The vSphere platform must be able to provide a service-level agreement (SLA) of 99,9%