A、 Make sure the wire in this position is able to unlock the parts.
B、 The wire must be positioned so that the parts can oscillate freely.
C、 Ensure the wire is positioned to create a locking motion on parts.
答案：C
A、 Make sure the wire in this position is able to unlock the parts.
B、 The wire must be positioned so that the parts can oscillate freely.
C、 Ensure the wire is positioned to create a locking motion on parts.
答案：C
A. 对于非 FAA 批准的飞机,其声明要写在飞行手册中。
B. 对非 FAA 批准的飞机飞行手册,做如下声明。
C. 在非 FAA 批准的飞行手册中要包括以下声明。
A. 记录对蒙皮表面进行的所有修理
B. 记录对蒙皮封严进行的所有修理。
c、记录对蒙皮损伤进行的所有处理。
A. Turn the knob clockwise to decrease the intensity of the light.
B. Turn the knob counterclockwise to decrease the intensity of the light.
C. In order to turn the knob clockwise, decrease the intensity of the light
A. Peel the coating from the harness.
B. Strip the insulation from the wire.
C. Stripe the insulation from the harness.
A. To simplify the overall master wiring diagram to make it easy to understand, complex systems should be
described in terms of functional interconnections
B. The overall master wiring diagrams are too complex to be understandable so the presentation of the
systems shall be simplified, and the interconnections should be plainly noted
C. To make the wiring diagrams simplified and understandable, the complex systems should be described in
system functions. The connection of each system shall be presented clearly.
A. 一个关于序号/组件号(或具他识别信息)的列表在右边页面的相应的栏目中
B. 页面右侧相应的栏目中列出了对应的序列号/组件号(或其他识别信息)
C. 一组对应序列号/组件号(或其他识别信息)的栏目应显示在正确的页面上
A. For "emergency", the related failure should be responded immediately, for example, the total engine
failure, fire or smoke sudden cabin pressure lost.
B. An "Emergency" almost including a serious failure that requires later response, such as a total engines
failure, flame out or smoke or rapid cabin pressurization.
C. For "emergency ", the related failure should be treated immediately,for example , the total engine is not
malfunctioning ,fire or smoke sudden cabin pressure lost.
A. station shows the height along the fuselage between the reference datum and the position
B. station is the distance of a point of fuselage to the location of reference datum along the
C. station means a position along the fuselage measured in inches from the reference datum
A. 如果错差超过 3 度,则要改装指南针。
B. 如果误差超过 3 度,则要校准罗盘。
C. 如果角度超过 3 度,则要调整圆规。
A. Move any of the four1bolts.A
B. Remove lone of the four bolts.
C. Remove each of the four bolts.
