A、 Insert the pin of the apron service door security connector, then you can perform this procedure.
B、 The ramp service door safety pin should be engaged until you start this procedure.
C、 Firstly you should perform this procedure then you can engage the ramp service door safety connector
pin.
答案：A
A、 Insert the pin of the apron service door security connector, then you can perform this procedure.
B、 The ramp service door safety pin should be engaged until you start this procedure.
C、 Firstly you should perform this procedure then you can engage the ramp service door safety connector
pin.
答案：A
A. 加入溶剂使油漆变得更稀薄
B. 加入溶剂使油漆变得更稳定
C. 在油漆里加入更多的溶剂
A. Briefly describe and explain principle of operation of any new kinds of flight instruments.
B. The working principles of various ne v flight gauges are easily introduced and expressed.
C. The new types of flight facilities should be described and explained shortly.
A. Based on different airplane design. The Emergency Procedures and other pertinent information necessary
for safe operation should only be provided for some airplane.
B. Based on the particular airplane design, operating or handling distinguishing feature, Emergency
Procedures and related information must be provided.
C. The Emergency procedures and other special information necessary for safe operation shall be provided
for emergencies that is common to all airplane design, operating or handling characteristics.
A. 始终遵守如下保持电线处于良好状况的法规
B. 始终遵守预防措施,然后保持电线处子良好状况
C. 始终遵守如下预防措施以保持电线处于良好状况
A. 用电线把电缆连接到结构上
B. 把钢索固定到结构上
C. 把电线系到结构上的电缆上
A. in STE, a unit started with 'topic sentence" is to instruct the main topic
B. The “topic sentence" starts to tell the readers the topic of the paragraph-inST6.
C. In STE, a paragraph starts with a "topic sentence which tells the reader what the topic of that paragraph is.
A. Grab a plier to release the clips.
B. Grab a screwdriver to release the bolts.
C. Grab a screwdriver to release the clips.
A. If a symbol or device is established for a valve or control, it shall be used for this type of unit throughout
the manual. The symbols used should be shown and identified in legend a block on the schematic diagram.
B. B、 If a symbol or device has been set up to a valve or control, the equipment type will be referred, to as this
symbol or device. throughout the manual. The legend block in the diagram displays or identifies symbols or
device.
C. If symbol or design is specified for a valve or control,this type of device is used throughout the section of
the manual. The symbols used can be found and identified in the legend block cof0the schematic. a
A. Find the related EICAS status message which present with the maintenance information
B. Find the correlated maintenance message that shows with the EICAS status message.
C. Find the applicable maintenance message displaying with the EICAS status message.
A. 将孔铰成比标准尺寸大 0.20 英寸。
B. 将孔铰成比标准尺寸大 0.20 英尺。
C. 将孔定位成比标准尺寸大 0.20 英寸。
