A、 The specification gives the symbols for relays, diodes, and other parts of the system.
B、 The specification gives the requirement for markings on relay, triode and other parts of the system.
C、 The specification excludes symbols for relays, diodes, and other system parts.
答案：A
A、 The specification gives the symbols for relays, diodes, and other parts of the system.
B、 The specification gives the requirement for markings on relay, triode and other parts of the system.
C、 The specification excludes symbols for relays, diodes, and other system parts.
答案：A
A. Make sure that the brightness of the reticle light rapidly drops to zero.
A. The word list only shows major changes.
B. The word list only shows minor changes.
C. Only major changes are highlighted in the word list.
A. Text shall be as brief and concise as practicable.
B. The text is simple and clear for readers.
C. When preparing the text, it(must be (easy /and relevant.
A. 本工作为准备飞机航班而给出维护步骤,以防两个空调组件失效。
B. 在两个空调组件关闭的情况下,本工作给出了为飞机飞行做准备的维护步骤。
C. 本工作给出了在两个空调组件均不工作的情况下为飞机飞行做好准备的维护步骤
A. For release with the ground preconditioned air connection single valve inoperative in the open position, do these steps.
B. For dispatch with the ground preconditioned air connection check valve inoperative in the open position, do these steps.
C. For release with the ground recondition ed air connection check valve inoperative in the open position ,do these steps.
A. The airworthiness and safe operation of an airplane is assured if it's used as its original design purpose,
properly inspected and carefully maintained.
B. The manufacturer is intended to utilize an airplane with sound inspection and maintenance practices
because that is the basis for assuring the airplane remains airworthy and safe to operate.
C. The airplane is designed to be used as the manufacture 's intention. Users shall properly inspect the
airplane and do sufficient maintenance to assure its airworthiness and operation safety.
A. If an annunciator panel TRANSIT light fails to illuminate while the corresponding device is in motion, then
this light must be considered inoperative.
B. When related device is in operation and if annunciator panel TRANSIT light comes on so this light does not
work.
C. The light is considered to be available if the annunciator panel TRANSIT light goes off when the related
device is in motion.
A. Each electrical system is identified by a code.
B. Each code of electrical system is identified.
C. Each system is identified by an electrical code.
A. 这个程序包括拆卸恒速驱动装置(CSD)的说明。
B. 此程序包括删除恒速驱动装置(CSD )的指令。
C. 这个程序包括指令来去除恒速驱动装置(CSD)。
A. The procedures should give the address of the facility and time the program will be rechecked to find out
if it is coherent enough for the type of maintenance being performed at the facility.
B. The program shall be checked to decide if it is updated and sufficient for the type of maintenance being
performed at the facility. The interval of the checks shall be stated in this procedure
C. The program will not be performed at the facility if this procedure shows outdated and inadequacy
information for the the type of maintenance.
