A、 在本构型中,必须执行不同的测试程序。
B、 在本构型中,可以选用不同的测试程序。
C、 本次会议强制要求使用不同的测试程序。
答案:A
A、 在本构型中,必须执行不同的测试程序。
B、 在本构型中,可以选用不同的测试程序。
C、 本次会议强制要求使用不同的测试程序。
答案:A
A. 如果发现铜颗粒;在发现之日起的 30 天内重复执行整个程序(机轮不承重)。
B. 如果发现金属碎屑,从即日起在 30 天内完成整个修理程序(机轮承重)。
C. 如果发现琥珀色指示参数,针对发现的数据在 30 天内重复所有程程序(机轮离地)。
A. 安装指示器时将其向后方倾斜。
B. 为了安装指示器,应将其向后移动。
C. 安装指示器时将其向前移动。
A. When wheel is dried, clean with the compressed air.
A. lf the wheel temperature reaches as high as 177 deg. the core of safety plug shears off and the tire slips.
B. If the wheel temperature increases to more than 177 deg, the core of the fusible plug melts and the tire
deflates.
C. The core of the filter element melts once the wheel temperature is above 177 deg, causing the tire to
deflate.
A. Mach digit is the percent of true airspeed to the speed of sound
B. Mach number is the ratio of true airspeed to the speed of sound.
C. Mach number is the proportion of real airspeed to the speed of fight.
A. A certificated pilot who owns or operates an airplane not used as an air carrier is authorized by FAR Part
A. lt is necessary to generally check these areas.
B. lt is imperative to regularly inspect these areas.
C. Frequent inspection of these areas is necessary.
A. 用密封剂填充补片及相邻结构之间的缝隙。
B. 用密封剂填充补片的缝隙,并粘接相邻结构。
C. 在附近的密封结构和补片之间留出空隙。
A. 如果包含所有技术数据,则标题应为飞机维修手册
B. 标题应为飞机维修手册,则所有数据包含在其中。
C. 飞机维修手册的标题应该包含所有技术数据。
A. An "Airplane Weighing Form" shall be included in each handbook and the form shall contain an airplane
side view that shows the location of weighing points (using jacking points or landing gear) relative to the
datum line.
B. Each handbook shall provide an aircraft side view that is included in an "Airplane Weighing Form" to show
the position of weighing points (using jacking points or landing gear) related to the datum line.
C. An airplane three view that shows the weighing point)(using jacking points or undercarriage) relative to
the datum line shall be excluded in an "Airplane Weighing Form" of each handbook.