A、 本工作为准备飞机航班而给出维护步骤,以防两个空调组件失效。
B、 在两个空调组件关闭的情况下,本工作给出了为飞机飞行做准备的维护步骤。
C、 本工作给出了在两个空调组件均不工作的情况下为飞机飞行做好准备的维护步骤
答案:C
A、 本工作为准备飞机航班而给出维护步骤,以防两个空调组件失效。
B、 在两个空调组件关闭的情况下,本工作给出了为飞机飞行做准备的维护步骤。
C、 本工作给出了在两个空调组件均不工作的情况下为飞机飞行做好准备的维护步骤
答案:C
A. 本规范涉及 FAA 的各种调节。
B. 本规范参考了各种 FAA 条例。
C. 本规范称作 FAA 的各种规章。
A. Obey the following procedure if the manufacturer provides you different instructions.
B. If the manufacturer instructs you differently the following procedure should be ignored.
C. lf the manufacturer's instructions are different from the following procedure, obey the following procedure
A. Such wires and cables should be disable of being coupled to the ground network of the aircraft electrical
system
B. These wires and cables are capable to be connected to the aircraft electrical system ground network.
C. The connected wires and cables shall be attached to the ground network of the aircraft electrical system.
A. 永久装订的手册页无需注明日期。
B. 临时装订的手册页无需注明日期。
C. 临时装订的手册页无需注释。
A. 拧松螺钉,但同时不要给它们打力矩
B. 拧紧螺母,但此时不要给它们打力矩
A. When you change a word with the alternative, you must. ensure that the meaning of the sentence varies.
B. The meaning of the sentence can be different when you use the alternative you select to replace a word.
C. Always keep the same meaning of the sentence when you use the alternative to replace a word.
A. 用电线把电缆连接到结构上
B. 把钢索固定到结构上
C. 把电线系到结构上的电缆上
A. The elevators must move in an even manner.
B. The elevators must keep moving accordingly.
C. The elevators must move correspondingly.
A. See the graphics for information of the solenoid valves which shall contain a note indicating the position
of the valve(weather spring-loaded to its open or closed position).
B. Solenoid valves indicated on the schematic shall have a notation indicating when the valve shall be
spring-loaded to the open or closed position.
C. Solenoid valves shall be indicated on the schematic and shall include a notation indicating whether the valve is spring-loaded to the open or closed position.
A. 控制组件的出口压力值,否则它不能稳定在正确压力范围。
B. 输出控制组件的压力,该组件不能稳定在正确压力范围。
C. 控制组件出口压力值不能稳定在正确压力范围。