A、 The manufacturer shall include a descript ion of the type service information issued by、 the manufacturer
and the office or department to contact to get such information that the aircraft may be maintained in
accordance with the latest information.
B、 The manufacturer shall include a description of the type service information issued by the manufacturer
and the office or department to contact to obtain such information sol that the aircraft may be maintained in
accordance with the latest information.
C、 The factory shall include a description of the type service information issued by the manufacturer and the
office or department to contact to obtain such information so that the aircraft may be maintained related to
the latest information.
答案：B
A、 The manufacturer shall include a descript ion of the type service information issued by、 the manufacturer
and the office or department to contact to get such information that the aircraft may be maintained in
accordance with the latest information.
B、 The manufacturer shall include a description of the type service information issued by the manufacturer
and the office or department to contact to obtain such information sol that the aircraft may be maintained in
accordance with the latest information.
C、 The factory shall include a description of the type service information issued by the manufacturer and the
office or department to contact to obtain such information so that the aircraft may be maintained related to
the latest information.
答案：B
A. If possible, always tell your reader what can show if the safety instruction is not accepted.
B. If possible, always tell your reader what can we do if the safety instruction is not understood
C. If possible, always tell your reader what can happen if the safety instruction is not followed.
A. Landing gear position has no effect on stall speeds.
B. The position of the landing gear doesn't influence the surging speed.
C. The idle speed is not effected by the landing gear position.
A. 重心是飞机悬浮时保持平衡的点。它与参考基准的距离是通过总力矩除以飞机的总重量得出的。
B. 飞机的重心是使飞机保持平衡的点。它与参考基准的距离可以通过总弯矩除以飞机总重量找到。
C. 重心是如果飞机悬着使飞机保持平衡的点。它到参照基准的距离可以通过总长度除以总重量找到。
A. 找出正确显示的来源。
B. 找出错误显示的原因。
C. 找出错误显示的位置。
A. 让飞机载荷平衡是飞机所有者和机长的责任
B. 飞机被正确地系留是飞机维护者和飞行员的责任。
C. 飞机所有者和飞行员有责任确保飞机装载正常
A. The manufacturer may establish procedures to provide drawback on unairworthy conditions.
B. The manufacturer may establish procedures to provide response(反馈) on unairworthy conditions.
C. The manufacturer may establish procedures to provide recall on unairworthy conditions.
A. Insert the pin of the apron service door security connector, then you can perform this procedure.
B. The ramp service door safety pin should be engaged until you start this procedure.
C. Firstly you should perform this procedure then you can engage the ramp service door safety connector
pin.
A. This compound can eliminate poisonous fumes.
B. This compound can release poisonous fumes
C. This composite alloy can release poisonous fumes.
A. The operator reassembled the linkage.
B. The operator adjusted the cable.
C. The operator adjusted the linkage.
A. The fuselage is a semi-monocoque structure
B. The fuselage is a demi-plate.
C. The airframe is of half-shell structure.
