802、The distance between the edge of the panel and the partition must not be more than 0.05 mm.
面板边缘与隔断的距离不得超过 0.05 mm。

A. 　 Explain check them whether normal or not, and how to identify a fault.

B. 　 Make cleat that if they operate properly and how to isolate the malfunction.

C. 　 Explain how to check them for proper operation and how to recognize a malfunction.

A. 　确保座舱温度保持恒定。

B. 　 确保座舱压力保持不变。

C. 　确保座舱湿度保持稳定。

A. 　向前旋转手柄

B. 　向后移动水平面

C. 　向后移动手柄

A. 　 The self-locking function decays after several removal and installation.

B. 　 Repeated removal and installation causes the self-locking nut to lose its locking feature.

C. 　 Avoid repeated removal and installation of the self-locking nut to protect its locking feature.

A. 　始终遵守如下保持电线处于良好状况的法规

B. 　始终遵守预防措施,然后保持电线处子良好状况

C. 　始终遵守如下预防措施以保持电线处于良好状况

A. 　 Obey the safety precautions when you do work with high voltages.

B. 　 When working with high resistances, you should follow the safety precautions.

C. 　 The safety precautions are optional in an environment with high voltages.

A. 　 Obey the following procedure if the manufacturer provides you different instructions.

B. 　 If the manufacturer instructs you differently the following procedure should be ignored.

C. 　 lf the manufacturer's instructions are different from the following procedure, obey the following procedure

A. 　 转动凸轮以使显示器松脱

C. 　转动把手以使显示器不再显示

A. 　 All publications shall use the standard numbering system.

B. 　 All documents and materials shall use the standardized numbering index system

C. 　 All publications shall use the standard numbering system for indexing.

A. 　 The color of the bottom mark on the plate is amber.

B. 　 You can see the red bottom mark on the board.

C. 　There is no color of the bottom mark on the board.