960、Open, safety and tag these circuit breakers.

A. 　 The main gear leg could be held by the side stay.

B. 　 The main gear leg could be hampered by the side stay.

C. 　 The main gear leg could be contained by the side stay.

A. 　 This is the maximum portion of flammable vapors in air If the portion is bigger, when an ignition source
touched the gas, it would cause the fire to be diffused.

B. 　 This is the minimum volume of flammable vapors. lf the volume is lower, when the gas contacted with an
ignition source, the fire would not come out.

C. 　 This is the minimum density of flammable vapors in air. if the density was lower, when an ignition 'source
touched the gas, it would not cause the spread of flame.

A. 　如果故障频繁出现,进行系统测试。

B. 　如果故障定期出现进行系统测试。

C. 　如果故障随机出现,进行操作测试。

A. 　 Make sure that the warning light turns on within 3 seconds.

B. 　 Make sure that the warning light is on for at least 3 seconds.

C. 　 Make sure that the warning light is turned on in no more than 3 seconds.

A. 　 These tests need no special equipment or facilities except those installed on the aircraft and are like the
tests performed by flight crews.

B. 　 These tests need some special equipment or facilities that are not installed on the aircraft. And these tests
are the same to the tests performed by flight crews.

C. 　 These tests need special equipment or facilities that are installed on the aircraft with the tests performed
by flight crews.

A. 　在左边空白处用黑色垂直线或用“手形指示”来标记确定插图的修改部分。

B. 　用与修改部分相对的左边空白处的黑色垂直线或用“手形指示”来确定插图的修改。

C. 　用左边空白处的黑色水平方向直线或用“手形指示”来确定插图的修改。

A. 　这种调整的精度很重要

B. 　这种调整的范围很重要

C. 　这种测试的精度很重要

A. 　 The Manufacture recommends that Buyer's qualified technicians inspect, troubleshoot test and repair or
replace systems and components recommended by the Manufacturer that may be repairable o replaceable
during normal maintenance procedures. The Manufacturer shall provide sufficient information in the
Maintenance Manual and/or Maintenance data.

B. 　 The Maintenance Manual and/or Maintenance Data provided by the manufacturer to the Purchaser shall
contain enough information to enable qualified mechanics to inspect, troubleshoot test and repair or replace
all systems and units that the Manufacturer regarded to be repairable or replaceable during normal
maintenance procedures.

C. 　 The Manufacturer shall provide the Purchaser with adequate information to enable the mechanics to do
qualified work, such s to inspect troubleshoot test and repair or replace all systems and components that
repairable or replaceable with reference to the Maintenance Manual and/or Maintenance Data ad required

A. 　注意、 当你取出探头时,不要让它们相互接触

C. 　注意:当你取出指针时,不要让它们相互接触

A. 　操作信息包括(但不限于)用于选择 CAPS 的结果-怎样制定 CAP 的要求

B. 　可选信息应包括(但不限于)用于选择 CAPS 的基本原理关于制定 CAP 的规则

C. 　可选信息包括(但不限于)用于选择 CAPS 的依据 CAP 要求是如何确定的