A、 the function of the portable water system is to store and send drinking water to the passenger
B、 The potable water system must keep and transfer the water to the toilet for washing only
C、 The purpose of the drinking water system is to store and deliver the water for drinking
答案：A
A、 the function of the portable water system is to store and send drinking water to the passenger
B、 The potable water system must keep and transfer the water to the toilet for washing only
C、 The purpose of the drinking water system is to store and deliver the water for drinking
答案：A
A. Do not make the pressure became less than (or more than)20 psi.
B. Do not let the pressure become less than (or more than)20 psi.
C. Do not let the pressure close less than (or more than) 20 psi.
A. 该部件中的空气循环使得特定部件的温度不超限。
B. 某些部件的温度不超限因此该部件中的空气能够流动。
C. 该部件中的空气的旋转和特殊部件的温度均不超限。
A. Turn the cap counterclockwise.
B. Turn the cap clockwise.
C. Rotate the cap clockwise.
A. 为了获得正确的间隙,需要增加特殊的垫片。
B. 为了获得正确的间隙,按需增加特殊的垫片。
C. 要获得正确的间隙,需要增加特定的垫片。
A. The repair limits are not permitted as special equipment is required.
B. The repair limits are not mentioned as special equipment IS required.
C. The repair limits are not set as special equipment is required.
A. Augment the pressure slowly (no less than one turn each minute)
B. Increase the pressure slowly (not more than one turn each minute)
c、 Release the pressure slowly (not more than one turn each minute).
A. Correct the defect before you stop the pump for a short time.
B. Record the defect before you stop the pump later.
C. Restore the defect before you stop the pump for a long time.
A. 在可行的情况下,语言和书写风格要遵守相应的规则和 STE 字典
B. 在可能和实际的情况下,语言和写作风格要遵守 STE 的规则和字典。
C. 在切实可行的情况下,STE 字典和规则要遵守其语言及书写风格。
A. Be sure that the position of the clamp has the same opinion with your record before you remove it
B. Make sure that the position of the clamp is the same as the position you recorded during the removal
procedure
C. Insure that the clamp matches the position that you recorded during the repair procedure.
A. The purpose of the CAP is to extend the current inspection scope so that the performance of the aircraft
keeps fulfilling the capability of the original certification.
B. The CAP is worked out to maintain the need for flight so that performance of the aircraft would conform
to the original certification standards.
C. CAP is designed to address the growing demand for flying and to keep aircraft in compliance with the
original certification standards.
