A、 Do not reach this speed with a given flap setting.
B、 Do not exceed this speed with a give flap setting.
C、 Do not exceed this speed with a given flap setting.
答案：C
A、 Do not reach this speed with a given flap setting.
B、 Do not exceed this speed with a give flap setting.
C、 Do not exceed this speed with a given flap setting.
答案：C
A. Make sure that the coils of the oxygen hose do not rub together.
B. lt is acceptable the coils of the chlorine hose rub together.
C. Ensure that the coils of the nitrogen hose do not rub together.
A. When hydraulic power is supplied, keep persons and equipment away control surfaces and landing gear.
B. When supplying power to the hydraulic system, persons and equipment should be away from all control
surfaces and landing gear.
C. Persons and equipment shall be away from all hydraulic system control surfaces and landing gear when
supply pressure.
A. 所有在此区域人员必须使用护目镜。
A. Grab a plier to release the clips.
B. Grab a screwdriver to release the bolts.
C. Grab a screwdriver to release the clips.
A. 始终遵守如下保持电线处于良好状况的法规
B. 始终遵守预防措施,然后保持电线处子良好状况
C. 始终遵守如下预防措施以保持电线处于良好状况
A. 调试抗严扰器直到你不再听到扩音器的杂音。
B. 调整电位计,直到你听不到扬声器的嗡嗡响。
C. 当你听不到喇叭的响声,调整分压器。
A. Oxidation occurs very easily
B. Oxygen occurs very easily.
C. Nitrogen occurs very easily.
A. You must obtain medical help as soon as you can.
B. You must obtain medical help as more as you can,
C. You must obtain medical instructions as soon as you can.
A. Propeller governor is a device that adjusts the speed of the engine or propeller by increasing or
decreasing the clearance of the propeller through the clearance changing mechanism on the propeller hub.
B. Propeller governor is the device that regulates the rpm of the engine or propeller by increasing or
decreasing the propeller pitch, through a pitch change mechanism in the propeller hub.
C. Propeller governor is through the propeller hub of the propeller pitch changing machine, adjusts the
speed of the propeller or engine by increasing or decreasing the propeller gap.
A. If there is hum from the loudspeaker, don’t adjust the potentiometer
B. Adjust then potentiometer unless hear a hum from the loudspeaker
C. Adjust the potentiometer until the loudspeaker no longer hums.
