61.Procedures shall be prepared in reference number sequence within each

A. 　用直尺和游标卡尺测量凹痕深度。

B. 　用直尺和塞尺测量凹痕深度。

C. 　游标卡尺和塞尺测量凹痕深度。

A. 　拆/装、拆卸/安装部分应清楚说明拆卸和安装部件或组件所需的步骤顺序,
以及遵循的预防事项。

B. 　拆装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件所需的步骤顺序,
以及要遵守的预防措施。

C. 　拆/装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件以及遵循的预
防事项所需的步骤顺序。

A. 　为了 CAP 在持续(连贯)的基础上取得成功,运营商、FAA 和 ABC 飞机公司
之间的信息自由流动至关重要。

B. 　为了在 CAP 基础上持续(连贯)取得成功,运营商、FAA 和 ABC 飞机公司之
间的信息自由流动至关重要。

C. 　为了使 CAP 取得 l 连续成功,运营商、FAA 和 ABC 飞机公司之间的信息自由
流动至关重要。

A. 　REACH

B. 　STRETCH

C. 　EXTEND

A. 　The data of the initial version shall be indicated on each page until
recision,and the data of the brand new version shall be indicated after
revision.

B. 　The data of the initial version shall be indicated on each page until
modified,and the data of the latest version shall be indicated after
modified.

C. 　Each page shall bear the date of the original issue until revised and,
when revised, that of the latest revision.

A. 　If the sleeve is incorrectly attached, adjust it.

B. 　If the sleeve is badly attached, adjust it.

C. 　If the sleeve is wrong attached,adjust it.

A. 　Adjust compass system 1 until it agrees with compass system 2.

B. 　Synchronize compass system 1 with compass system 2.

C. 　Regulation compass system 1 until it agrees with compass system 2.

A. 　This action must not be done in the hangar.

B. 　Do not do this procedure in the hangar.

C. 　On the hanger,Don't do this procedure .

A. 　这些安全警告满足维修区工作的全部要求。

B. 　这些安全提示有必要作为维修区工作要求。

C. 　这些安全预防措施是在维修区工作的最低要求。

A. 　ASSURE

B. 　MAKE SURE

C. 　ASCERTAIN