APP下载

在校教育

噜啦啦噜啦噜啦啦啦啦啦啦1

搜索

噜啦啦噜啦噜啦啦啦啦啦啦1

题目内容

(

单选题

)

78.Calibrated Airspeed ( ) is to be used only as necessary to comply
with any applicable requirements of the certificating authority as the
pilot works exclusively with Indicated Airspeed ( ).

A、　修正空速(CAS)仅为按需使用,以符合认证机构的任何对应要求,因为飞行员
延程飞行时需按照指示空速(IAS)工作。

B、　修正空速(CAS)仅在紧急情况时使用,以符合认证机构的任何对应要求,因为
飞行员不能按照指示空速(IAS)工作。

C、　修正空速(CAS)仅在必要时使用,以符合认证机构的任何对应要求,因为飞行
员完全按照指示空速(IAS)工作。

答案：C

噜啦啦噜啦噜啦啦啦啦啦啦1

272.The pressure lines divide in different directions.

点击查看题目

306.在补片表面施加重量,以确保部件正确粘合。

点击查看题目

702.Utilizing an airplane as intended by the manufacturer, combined with
sound inspection and maintenance practices, forms the basis for assuring
the airplane remains airworthy and safe to operate.

点击查看题目

231.SET THE SWITCH TO THREE CYCLES A MINUTE.

点击查看题目

597.WHEN THE TEMPERATURE OF THE VENTILATION AIR ( ) TO 27 ° C, THE

点击查看题目

33.Number the pages of multi-section CAPs with section number and a dash
(i.e., "1-" for all pages in the "Physical Requirements" section)
followed by the serial number of the page beginning with "1" for each
section (e.g-.Page 1-1, 1-2. etc.)

点击查看题目

373.Get the approval of the design authority before you change the
procedure.

点击查看题目

479.The exhaust gas temperature indicator, on piston engine powered
airplanes, is the instrument used to identify the lean fuel flow mixtures
for various power settings.

点击查看题目

317.Any item affected by STCs in ABC Manuals or CAPs must be brought to
the attention of the STC holder by the owner or maintenance organization in the
inspection,repair,preservation,etc.of that item .

点击查看题目

528.This installation procedure is typical for this type of fastener.

题目内容

(

单选题

)

手机预览

噜啦啦噜啦噜啦啦啦啦啦啦1

78.Calibrated Airspeed ( ) is to be used only as necessary to comply
with any applicable requirements of the certificating authority as the
pilot works exclusively with Indicated Airspeed ( ).

A、　修正空速(CAS)仅为按需使用,以符合认证机构的任何对应要求,因为飞行员
延程飞行时需按照指示空速(IAS)工作。

B、　修正空速(CAS)仅在紧急情况时使用,以符合认证机构的任何对应要求,因为
飞行员不能按照指示空速(IAS)工作。

C、　修正空速(CAS)仅在必要时使用,以符合认证机构的任何对应要求,因为飞行
员完全按照指示空速(IAS)工作。

答案：C

相关题目

272.The pressure lines divide in different directions.

A. 　压力管分布在另一个方向上。

B. 　压力管分布在相同的方向。

C. 　压力管分布在不同的方向。

点击查看答案

306.在补片表面施加重量,以确保部件正确粘合。

A. 　Apply mass on the surface of the patch to ensure that the parts bond
correctly.

B. 　Bear down on the surface of the patch to make sure that the parts bond
correctly.

C. 　Apply weight on the surface of the patch to make sure that the parts
bond correctly.

点击查看答案

702.Utilizing an airplane as intended by the manufacturer, combined with
sound inspection and maintenance practices, forms the basis for assuring
the airplane remains airworthy and safe to operate.

A. 　The basis for assuring an airplane remains airworthy and safe to operate
is to combine the manufacturer’s requirements with sound inspection and
maintenance practices.

B. 　To ensure airworthiness and safe operation of an airplane, it is
essential to follow the manufacturer’s instructions in the utilization
of airplane, and perform sound inspection and maintenance as well.

C. 　Airworthiness
aircraft
utilization as required by the manufacturer, so sound inspection and
maintenance practices are carried out.

点击查看答案

231.SET THE SWITCH TO THREE CYCLES A MINUTE.

A. 　设置电门每秒钟三个循环

B. 　设置电门每分钟三个循环

C. 　设置电门每三分钟三个循环

点击查看答案

597.WHEN THE TEMPERATURE OF THE VENTILATION AIR ( ) TO 27 ° C, THE

A. 　ACCELERATES

B. 　AGGRAVATES

C. 　INCREASES

点击查看答案

A. 　用章节号和连字符(比如“1-”表示“物理要求”章节中的所有页面)加节号
对持续适航方案里的多章节页面进行编号,节号从“1”开始(如第 1-1、1-2 页
等)。

B. 　用节号和破折号(比如“1-”表示“物理要求”章节中的所有页面)加章号对
持续适航方案里的多章节页面进行编号,节号从“1”开始(如第 1-1、1-2 页等)。

C. 　用章号和破折号(比如“1-”表示“物理要求”章节中的所有页面)加节号对
持续适航方案里的多章节页面进行编号,节号从“1”开始(如第 1-1、1-2 页等)。

点击查看答案

373.Get the approval of the design authority before you change the
procedure.

A. 　在程序变化之前要得到改装权威部门的批准。

B. 　在更改程序之前要得到设计权威部门的批准。

C. 　在修订程序之前要得到设计权威部门的批准。

点击查看答案

479.The exhaust gas temperature indicator, on piston engine powered
airplanes, is the instrument used to identify the lean fuel flow mixtures
for various power settings.

A. 　在活塞发动机驱动的飞机上,排气温度指示器用于识别各种功率设置下的油
气比。

B. 　在活塞发动机驱动的飞机上,排气温度指示器用于设置各种功率设置下的油
和空气的混合比。

C. 　在动力活塞驱动的飞机发动机上,排气温度指针用于识别最大功率设置下的
油气比。

点击查看答案

A. 　For the in-spection,repairs,preservation,etc. of item influenced by STCs in ABC
Manual or CAPs must be brought to the attention of the STC holder by the
owner or maintenance organization.

B. 　Such items,effected by STCs in ABC Manuals or CAPs,must be noted to
the STC holder by the owner or maintenance organization in order to acquire

C. 　The STC holder must be informed of all item affected by STCs in ABC
Manuals or CAPs by the owner or maintenance organization in order to gain

点击查看答案

528.This installation procedure is typical for this type of fastener.

A. 　此安装程序是此类紧固件的典型安装程序。

B. 　此安装程序是此类松紧装置类型的安装程序。

C. 　此安装过程是此类紧固件的安装类型。

类似热门题库

2024年大学生期满转正练习题库（工艺类汇总版）

2024年上海中学生时政复习参考

78.Calibrated Airspeed ( ) is to be used only as necessary to complywith any applicable requirements of the certificating authority as thepilot works exclusively with Indicated Airspeed ( ).

78.Calibrated Airspeed ( ) is to be used only as necessary to comply
with any applicable requirements of the certificating authority as the
pilot works exclusively with Indicated Airspeed ( ).