A、 LISTEN
B、 FIND
C、 LOOK
答案:A
A、 LISTEN
B、 FIND
C、 LOOK
答案:A
A. The order of topics in the Handbook is intended to increase in-flight
usefulness.
B. The sequence of topics in the Handbook is intended to increase in-flight
useless.
C. The sequence of topics in the Handbook is pretended to increase
in-flight usefulness.
A. The wind speeds recorded as alterables on the diagrams of this Handbook
shall be understood as the headwind or tailwind components of the reported
wind .
B. The wind velocities recorded as variables on the charts of this Handbook
are goning to be understood as the headwind or tailwind constituents of
the reported wind .
C. The wind velocities recorded as immutables on the charts of this
A. The data of the initial version shall be indicated on each page until
recision,and the data of the brand new version shall be indicated after
revision.
B. The data of the initial version shall be indicated on each page until
modified,and the data of the latest version shall be indicated after
modified.
C. Each page shall bear the date of the original issue until revised and,
when revised, that of the latest revision.
A. 第一个步骤有时是工作准备,收尾或收工是接下来的步骤
B. 工作准备总是第一个步骤,收尾或收工总是接下来的步骤。
C. 工作准备总是第一个步骤,收尾或收工总是最后一个步骤。
A. 拆/装、拆卸/安装部分应清楚说明拆卸和安装部件或组件所需的步骤顺序,
以及遵循的预防事项。
B. 拆装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件所需的步骤顺序,
以及要遵守的预防措施。
C. 拆/装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件以及遵循的预
防事项所需的步骤顺序。
A. 、 For the in-spection,repairs,preservation,etc. of item influenced by STCs in ABC
Manual or CAPs must be brought to the attention of the STC holder by the
owner or maintenance organization.
C. holder must be informed of all item affected by STCs in ABC
Manuals or CAPs by the owner or maintenance organization in order to gain
A. 因 CAP 是针对特定的零件或部件,可得知检查将包括对零件和设备周围区域的
观察和评估。
B. 由于 CAP 是针对特定的零件或部件,可推测出检查将包括对零件和设备周围区
域的观察和评估。
C. 只要 CAP 是针对特定的零件或部件,就意味着检查将包括对零件和设备周围区
域的观察和评估。
A. Replace components that worn more than the maximum limits.
B. Replace components that worn more than the less than limits.
C. Replace components that worn more than the minimum limits.
A. 如果不正确跟进操作程序、检查、修理或维护程序,可能导致人员受伤。
B. 如果没有紧跟操作程序、检查、修理或维护程序,可能导致人员伤亡。
C. 如果不正确遵循操作程序、检查、修理或维护程序,可能导致人员伤亡。
A. 更换磨损超标的组件。
B. 更换磨损达标的组件。
C. 修理磨损超标的组件。