134.Remove one of the four bolts.

A. 　Both master schematic diagrams and system function of complex systems
should be for simplicity of presentation and understandability.

B. 　Complex systems should be divided into system function but not overall
master schematic diagrams for homeliness and a better understanding of
presentation.

C. 　For simplicity of presentation and understandability, complex systems
should be divided into either system function or overall master schematic
diagrams.

A. 　You can use electric motors to drive fuel and hydraulic pumps or to
drive a valve to the commanded position in the fuel,hydraulic or air
conditioning system or to move doors and cargo containers.

B. 　Electric motor can drive fuel and hydraulic pumps or drive a valve to
the commanded position in the fuel,hydraulic or air conditioning system
or move mechanical parts like doors and cargo containers to produce
mechanical power.

C. 　Electric motor produce mechanical power and their main functions are
to drive fuel and hydraulic pumps,to drive a valve to the commanded
position and to move mechanical parts like doors and cargo containers.

A. 　The wire must touch the front of the contact.

B. 　The wire must bond the rear of the contact.

C. 　The wire must touch the rear of the contact.

A. 　调节螺钉转动后,使压力平稳。

B. 　每次转动调节螺钉后,使压力稳定。

C. 　只要转动调整螺钉后,使压力稳定。

A. 　Database synchronization is still on.

B. 　Database synchronization is in progress.

C. 　The database is already synchronizing.

A. 　把这些部分中的每一个故障按概率的顺序列出。

B. 　把这些部分按概率的顺序列在每个故障下面。

C. 　把这些故障列在每个部分下面为了增加概率。

A. 　irworthiness Programs prepared to enhance safety.

B. 　、Standardization will enhance safety though uniform interpretation of
inspection requirements contained in

C. 　、Standardization will in accord with this Specification through uniform
interpretation of inspection requirements contained in Continuing

A. 　Other information like GAMA membership identification, copyright
notice, etc., may be added. CAP producer shall determine the format and
layout, and they shall resemble the producer's existing documents.

B. 　Additional information, such as GAMA membership identification,
copyright notice, etc., may be included. Format and layout is to be decided
by the CAP producer, recognizing the it is desirable that they should be
familiar to the producer's existing documents.

C. 　Cap producer may include other information like GAMA membership
identification, copyright notice, etc., and determine the format and
layout which should be distinct from the producer's existing documents.

A. 　 In flight,Flight Idle Power required for the engine to operate at slowly
speed is an important condition to ensure good engine operation and
airplane handing characteristics.

B. 　 Flight Idle Power is the power required for an engine to operate at
a minimum speed during flight to ensure satisfactory engine operation and
aircraft handing characteristics.

C. 　 In flight,good engine operation and aircraft handing characteristics
are guaranteed to provide the engine with Flight Idle Power needed to
operate at the lowest speed .

A. 　if the engine appears to be heating, turn it off.

B. 　if the engine appears to be overheating, turn it off.

C. 　if you think the engine is too hot, turn the switch to “off”.