A、 In this section which is a separate attachment of the Handbook or as
a separate document, the manufacturer shall provide an equipment list.
B、 The manufacturer shall provide an equipment list in this section, in
a separate document appended to the Handbook, or as a separate document.
C、 Being a separate appendix of the Handbook or as a separate document,
the manufacturer shall provide a list of equipment of this section.
答案:B
A、 In this section which is a separate attachment of the Handbook or as
a separate document, the manufacturer shall provide an equipment list.
B、 The manufacturer shall provide an equipment list in this section, in
a separate document appended to the Handbook, or as a separate document.
C、 Being a separate appendix of the Handbook or as a separate document,
the manufacturer shall provide a list of equipment of this section.
答案:B
A. defects
B. Leakage
C. abrasive
A. 基本控制和操作信息,描述如何控制及操作飞机部件,涉及到一些特殊程序
和飞行控制信息适用的限制。
B. 基本控制和操作信息,描述如何控制及操作飞机部件,涉及到许多特殊程序
和飞机部件适用的限制。
C. 基本控制和操作信息,描述如何控制及操作飞机部件,涉及到所有特殊程序
和飞机部件适用的限制。
A. 维护手册的简介部分应包含供应商出版物的清单,或提及此类清单的位置,
无论这些清单是包含在系统说明中还是在单独的文档中提供的。
B. 维护手册的简介部分应包含供应商出版物的清单,并提及此类清单的位置,
无论这些清单是包含在系统说明中还是在单独的文档中提供的。
C. 维护手册的简介部分既不包含供应商出版物的清单,也未提及此类清单的位
置,无论这些清单是包含在系统说明中还是在单独的文档中提供的。
A. Set the switch to on.
B. Move the switch to on.
C. Put the switch to on.
A. This procedure is only applicable to type A parts
B. This task in only used for type A parts
C. This procedure is applicable to all type parts
A. APPROVAL
B. AUTOMATIC
C. AUTHORITY
A. 一旦确定了活门或控制装置的符号或设备,则应在整个手册中将其用于相关
单元。
B. 只要确定了活门或控制装置的特征或设备,则应在整个手册中将其用于此类
装置。
C. 一旦确定了活门或控制装置的符号或设备,则应在整个手册中将其用于此类
装置。
A. 本规范旨在为最初以 12500 磅或以下(或 5700 千克)最大起飞重量认证的所
有类型通用航空飞机提供手册编制指南。
B. 本规范的制定是为手册编写提供规范性制导,用于 12500 磅(或 5700 千克)
或以下最大起飞重量的所有类型飞机。
C. 本规范规定了以起始为 12500 磅或以下(或 5700 千克)最大起飞重量认证的
所有类型通用航空飞机提供手指编制指导。
A. Deflate the system before you disconnect the components.
B. Bleed the system before you disconnect the components.
C. Bleed the system before you interrupt the components.
A. 此安装程序是此类紧固件的典型安装程序。
B. 此安装程序是此类松紧装置类型的安装程序。
C. 此安装过程是此类紧固件的安装类型。