191.IF THE FLAPS DO NOT FULLY( ), DO THE TEST AGAIN.

A. 　Both master schematic diagrams and system function of complex systems
should be for simplicity of presentation and understandability.

B. 　Complex systems should be divided into system function but not overall
master schematic diagrams for homeliness and a better understanding of
presentation.

C. 　For simplicity of presentation and understandability, complex systems
should be divided into either system function or overall master schematic
diagrams.

A. 　简介中应包含主题的字母索引,用于定位重要的电路。

B. 　字母表应按照主题分类后在简介中列出,用于定位理想电路。

C. 　简介中应包含主题分类的字母索引,以帮助查找所需的电路。

A. 　两个关断螺栓是可调节的。

B. 　两个止动螺栓是可校准的。

C. 　两个止动螺栓是可调节的。

A. 　 通常,当在章节末尾或出版物的后部增加页面--不影响手册中的页面时--必
须准备修订版。

B. 　 通常,当在章节一端或出版物的背面增加页面--不影响手册中的页面时--必
须随时准备修订版。

C. 　 通常,当在章节末尾或出版物的背面增加页面--不影响手册中已经存在的页
面时--必须准备修订版。

B. 　When making this specification,we use the exact identical construction
rules with FAA in making its specifications.

A. 　Divide the follow wind component by the aircraft speed to get the
correction.

B. 　Divide the crosswind component by the aircraft speed to get the
righting.

C. 　Divide the crosswind component by the aircraft speed to get the
correction.

A. 　GO INTO

B. 　CIRCULATE

C. 　FLOW

A. 　ambient Air Temperature is the static free air temperature attained
from inflight temperature indications or surface meteorological sources,
adjusted for instrument error and compressibility effects.

B. 　Outside Air Temperature is the free air electrostatic temperature,
contained neither from inflight temperature indications nor ground
meteorological and compressibility effects.

C. 　Outside Air Temperature is the free air static temperature, obtained
either from inflight temperature indications or ground meteorological
sources, adjusted for instrument error and compressibility effects.

A. 　 Lift the cylinder above its installed position.

B. 　 Lift the cylinder about its installedposition.

C. 　 Increase the cylinder above installed position.

A. 　Replace components that worn more than the maximum limits.

B. 　Replace components that worn more than the less than limits.

C. 　Replace components that worn more than the minimum limits.