A、 to arrive at the incorrect value, set the switch to position 2.
B、 to get the correct value, set the switch to position 2.
C、 to get the incorrect value, set the switch to position 2.
答案：B
A、 to arrive at the incorrect value, set the switch to position 2.
B、 to get the correct value, set the switch to position 2.
C、 to get the incorrect value, set the switch to position 2.
答案：B
A. Measure the time necessary for the silica gel to decrease the moisture.
B. Check the time necessary for the silica gel to increase the moisture.
C. Measure the time necessary for the silica gel to absorb the moisture.
A. 为了便于故障排除,应使用电路维修,部件更换及标识和编码系统。
B. 为了加快故障排除及电路维修,应使用部件更换及标识和编码系统。
C. 为了便于故障排除,电路维修和部件更换应使用标识和编码系统。
A. if the engine appears to be heating, turn it off.
B. if the engine appears to be overheating, turn it off.
C. if you think the engine is too hot, turn the switch to “off”.
A. 设置电门每秒钟三个循环
B. 设置电门每分钟三个循环
C. 设置电门每三分钟三个循环
A. GET INTO
B. GO INTO
C. ENTER
A. You do not need to given the return processes in its entirely unless
you need to comprehend the system.
B. Unless you need to understand the system,do not need be shown full the
return lines.
C. Return procedures need not be shown in completely besides needed to
realize the system.
A. 、 A the inspection,repairs,preservation,etc. of item influenced by STCs in ABC
Manual or CAPs must be brought to the attention of the STC holder by the
owner or maintenance organization.
C. holder must be informed of all item affected by STCs in ABC
Manuals or CAPs by the owner or maintenance organization in order to gain
guidelines for FAA-approved guidelines for the inspection,repair,preservation,etc.of
that item .
A. INNER
B. OUTPUT
C. INPUT
A. It is standard to do the procedure in this service bulletin.
B. It is necessary to do the procedure in this service bulletin.
C. It is mandatory to do the procedure in this service bulletin.
A. Rub the surface with a soft, dry cloth.
B. rRub the surface fast with a soft, dry cloth.
C. Rub the surface quickly with a soft, dry cloth.
