A、 在选择检查时间或对疲劳应力的影响方面,没有理性的考虑造成腐蚀的原因。
B、 (从基本原理角度)选择检查时间或对疲劳应力的影响方面,没有考虑造成腐
蚀的原因
C、 在选择检查时间或对疲劳应力的影响方面,没有(从基本原理角度)考虑腐
蚀的影响。
答案:C
A、 在选择检查时间或对疲劳应力的影响方面,没有理性的考虑造成腐蚀的原因。
B、 (从基本原理角度)选择检查时间或对疲劳应力的影响方面,没有考虑造成腐
蚀的原因
C、 在选择检查时间或对疲劳应力的影响方面,没有(从基本原理角度)考虑腐
蚀的影响。
答案:C
A. In flight,Flight Idle Power required for the engine to operate at slowly
speed is an important condition to ensure good engine operation and
airplane handing characteristics.
B. Flight Idle Power is the power required for an engine to operate at
a minimum speed during flight to ensure satisfactory engine operation and
aircraft handing characteristics.
C. In flight,good engine operation and aircraft handing characteristics
are guaranteed to provide the engine with Flight Idle Power needed to
operate at the lowest speed .
A. When making this specification,the rules are generally refer to the
rules that used by FAA in making its rules .
B. When making this specification,we use the exact identical construction
rules with FAA in making its specifications.
C. The rules of construction followed in the preparation of this
specification are the same as generally used by the FAA in the preparation
of its rules.
A. 如果不同时这样做,则会卡住定位销。
B. 如果不同时这样做,则会导致定位销磨损。
C. 如果不同时这样做,则会导致定位销脱落。
A. All flow control devices within the system, such as check valves, fuel
pumps, accumulators, and relays should be included.
B. All flue control devices within the system, such as single valves, fuel
pumps, storage, and relays should be included.
C. All flow control devices within the system, such as single valves, fuel
pumps, accumulators, and relays should be included.
A. 设置电门每秒钟三个循环
B. 设置电门每分钟三个循环
C. 设置电门每三分钟三个循环
A. 如果温度值超过允许的限制,就增加功率。
B. 如果限制值超过允许的限制,就降低功率。
C. 如果温度值超过允许的限制,就降低功率。
A. 如果组件变得很干净,那么组件的寿命将会增加。
B. 如果组件变得很脏,那么将降低组件的使用率。
C. 如果组件变得很脏,那么组件的寿命将会缩短。
A. the lower seal comes into view when you pull the lower bearing down.
B. The lower seal shows as the lower bearing is pulled down.
C. The lower seal appears as the up bearing is pulled down.
A. DIM
B. DARK
C. ILLUMINATE
A. Calibrate the hygrometer to the celsius scale.
B. Calibrate the thermometer to the celsius scale.
C. Calibrate the clinometer to the celsius scale.