512.An important occurrence that can cause damage or have dangerous
results.

A. 　 Replace components that worn more than the maximum limits.

B. 　 Replace components that worn more than the less than limits.

C. 　 Replace components that worn more than the minimum limits.

A. 　 It is standard to do the procedure in this service bulletin.

B. 　 It is necessary to do the procedure in this service bulletin.

C. 　 It is mandatory to do the procedure in this service bulletin.

A. 　ambient Air Temperature is the static free air temperature attained
from inflight temperature indications or surface meteorological sources,
adjusted for instrument error and compressibility effects.

B. 　Outside Air Temperature is the free air electrostatic temperature,
contained neither from inflight temperature indications nor ground
meteorological and compressibility effects.

C. 　Outside Air Temperature is the free air static temperature, obtained
either from inflight temperature indications or ground meteorological
sources, adjusted for instrument error and compressibility effects.

A. 　 Plus,items not previously considered for inclusion in the CAP may be
disclosed though operator inspections.

B. 　 Also,items without being previously considered for inclusion in the

C. 　 However,those items not previously covered in the CAP may be found
through operator inspections.

A. 　用章节号和连字符(比如“1-”表示“物理要求”章节中的所有页面)加节号
对持续适航方案里的多章节页面进行编号,节号从“1”开始(如第 1-1、1-2 页
等)。

B. 　用节号和破折号(比如“1-”表示“物理要求”章节中的所有页面)加章号对
持续适航方案里的多章节页面进行编号,节号从“1”开始(如第 1-1、1-2 页等)。

C. 　用章号和破折号(比如“1-”表示“物理要求”章节中的所有页面)加节号对
持续适航方案里的多章节页面进行编号,节号从“1”开始(如第 1-1、1-2 页等)。

A. 　根据收到的 CAP 检查报告来确定腐蚀的影响是非常困难的,但是,检查时间
将根据任何发现的严重问题进行调整。

B. 　确定腐蚀的影响是非常困难的,但是,根据收到的 CAP 检查报告,检查时间
将根据任何发现的严重问题进行调整。

C. 　确定影响腐蚀的因素是非常困难的,但是,根据收到的 CAP 检查报告,检查
时间将根据任何发现的严重问题进行调整。

A. 　The intention of such terms is to provide definitions which have
practical value for technical communication.

B. 　The purpose of such terms is to provide definitions with practical value
for technical communication.

C. 　The aim of such terms is to provide definitions for practicing valuable
technical communication.

A. 　If you must add pages after the ahead printing, then the page should
have the number of the preceding page and an alphabetic suffix.

B. 　In the event a page must be added pursuant to the original printing,
the page shall carry the number of the preceding page with a letter suffix
added.

C. 　If you must add pages after the individual printing, then the page should
contain the serial number of the preceding page,and add a suffix letters.

A. 　All pages of semi-size fixed-leaf manuals shall be set up for standard
loose-leaf fling.

B. 　All pages of each size fixed-leaf manuals shall be set up for standard
loose-leaf fling.

C. 　All pages of full size loose-leaf manuals shall be set up for standard
loose-leaf fling.

A. 　 INFLATE

B. 　 SWELL

C. 　 EXPAND