A、 Divide the follow wind component by the aircraft speed to get the
correction.
答案:C
A、 Divide the follow wind component by the aircraft speed to get the
correction.
答案:C
A. 修正空速(CAS)仅为按需使用,以符合认证机构的任何对应要求,因为飞行员
延程飞行时需按照指示空速(IAS)工作。
B. 修正空速(CAS)仅在紧急情况时使用,以符合认证机构的任何对应要求,因为
飞行员不能按照指示空速(IAS)工作。
C. 修正空速(CAS)仅在必要时使用,以符合认证机构的任何对应要求,因为飞行
员完全按照指示空速(IAS)工作。
A. 无线电高度表在初始爬升时确定飞机距离地面的高度,确定飞机是否进入进近
和着陆阶段。
B. 无线电高度表在初始爬升、进近和着陆阶段确定飞机的地形和高度。
C. 无线电高度表在初始爬升、进近和着陆阶段确定飞机距离地面的高度。
A. 使用一种打印形式,打印出适合复制的黑白图像。
B. 使用一种打印形式,打印出适合打印的彩色图像。
C. 使用一种打印形式,打印出适合重造的黑白图像。
A. viation Regulations may prepare CAPs
B. General Aviation Manufacturers Association Built up this Specification
to guide the airplane, engine and component manufacturers to prepare
C. APs
D. ocuments(which may also be
called Continuing Airworthiness Programs or CAPs). All types of general
aviation airplanes and components certified under the applicable Federal
F. ederal
I. nspection Documents(which may also be
called Continuing Airworthiness Programs or CAPs). All types of general
aviation airplanes and components certified under the applicable Federal
A. 做腐蚀检查。
B. 做损害检查。
C. 检查由腐蚀造成的损伤。
A. 如果液压供给停止,则取消测试。
B. 如果压力供给停止,则取消测试。
C. 如果压力供给停止,则测试自动取消。
A. The data of the initial version shall be indicated on each page until
recision,and the data of the brand new version shall be indicated after
revision.
B. The data of the initial version shall be indicated on each page until
modified,and the data of the latest version shall be indicated after
modified.
C. Each page shall bear the date of the original issue until revised and,
when revised, that of the latest revision.
A. 确保箭头指向燃油流量流动的方向。
B. 确保标记指向燃油流量流动的方向。
C. 确保标记指向燃油流量相反的方向。
A. 应另提供排故信息,说明可能的故障,如何识别这些故障的方法以及故障的
纠正措施。
B. 故障排除信息描述可能发生的故障,应另提供如何识别这些故障的方法,以
及针对这些故障采取的补充措施。
C. 故障排除信息描述可能发生的故障,应另提供如何识别这些故障的方法,以
及针对这些故障采取的有效措施。
A. This material releases dangerous fumes when it touches hot surfaces.
B. On contact with hot surfaces, this material produces dangerous fumes.
C. This material happens dangerous gases when it comes into contact with
hot surfaces.