A、 Loosen and remove nut with wrench.
B、 Tighten and torque nut with spanner.
C、 Remove and replace nut with wrench.
答案:A
A、 Loosen and remove nut with wrench.
B、 Tighten and torque nut with spanner.
C、 Remove and replace nut with wrench.
答案:A
A. 无论是否经过书面许可,都不得以任何形式复制本文件的任何部分。
B. 经出版者书面许可,可以复制本文件的任何部分。
C. 未经出版者书面许可,不得以任何形式复制本文件的任何部分。
A. 如果有编号,它们无需遵循本规范中的编号而按流程编号,为了避免因规范
材料不适用飞机构型而产生的“间隙”。
B. 如果有编号,它们无需遵循本规范中的编号而按特定的方法编号,以避免因
规范材料不符合飞机型号而产生的“差距”。
C. 如果有编号,它们应按顺序编号,无需遵循本规范中的编号,以避免因规范
内容不适用飞机型号而产生的“间隙”。
A. 两个关断螺栓是可调节的。
B. 两个止动螺栓是可校准的。
C. 两个止动螺栓是可调节的。
A. DISCHARGES
B. EMITS
C. TRANSMITS
A. 一旦确定了活门或控制装置的符号或设备,则应在整个手册中将其用于相关
单元。
B. 只要确定了活门或控制装置的特征或设备,则应在整个手册中将其用于此类
装置。
C. 一旦确定了活门或控制装置的符号或设备,则应在整个手册中将其用于此类
装置。
A. Continuing Airworthiness Program Inspections usually include two pages、
one text page and one illustration page
B. Continuing Airworthiness Program Inspections usually exclude two pages、
one text page and one illustration page
C. Continuing Airworthiness Program Inspections usually make up two pages、
one text page and one illustration page
A. 所有范围距离均应以英里表示。
B. 所有范围距离均应以公里表示。
C. 所有范围距离均应以海里表示。
A. to arrive at the incorrect value, set the switch to position 2.
B. to get the correct value, set the switch to position 2.
C. to get the incorrect value, set the switch to position 2.
A. GET DOWN
B. FALL TO
C. GO DOWN
A. Let the temperature increase until it is the same as the ambient
temperature.
B. Wait for a few minutes until the temperature of the component exceeds
the ambient temperature.
C. Let the component cool down until its temperature is the same as the
ambient temperature.