730.IF YOU ( )THAT THE HYDRAULIC PUMP DOES NOT OPERATE CORRECTLY, EXAMINE
THE PUMP.

A. 　Make sure that the diameter of the hole is less than the specified value.

B. 　Make sure that the diameter of the hole is more than the specified value.

C. 　Make sure that the radius of the opening is less than the specified
value.

A. 　LIGHTS

B. 　COMES IN

C. 　COMES ON

A. 　The date of the change shall be shown on each printed page.

B. 　The date of the revision shall be shown on each revised page.

C. 　The time of the revision shall be shown on each revised page.

A. 　Maneuvering Speed is the maximum speed what required of full uncommitted
aerodynamic control will not exceed the airplane.

B. 　Maneuvering Speed is the largest speed that the aerodynamic application
by the full available control will not cause the aircraft overexert.

C. 　Maneuvering Speed is the maximum speed at which application of full
available aerodynamic control will not overstress the airplane.

A. 　The sequence of the explanation should be powerplant instrument
markings,then power plant limitations .

B. 　An explanation of powerplant instrument markings shall immediately
follow the presentation on power plant limitations.

C. 　Presentation on powerplant limitations shall come after the explanation
of powerplant instrument markings .

A. 　型号合格证

B. 　类型合格证

C. 　型号许可证

A. 　If you cannot remove a nut because of corrosion, apply penetrating oil.

B. 　If you cannot disassembly a bolt because of corrosion, use penetrating
oil.

C. 　If you cannot remove a bolt because of corrosion, apply penetrating
oil.

A. 　In this specification, for those who do not have an established code,individual electrical symbols are given as a suggestion.

B. 　As a suggestion for those who do not have an established code, individual
electrical symbols are gained in this specification.

C. 　As a suggestion for those who do not have an established code, individual
electrical symbols are required in this specification.

A. 　ACCELERATES

B. 　AGGRAVATES

C. 　INCREASES

A. 　Maximum Landing Weight is maximum weight approved for the landing
touchdown.

B. 　Maximum Landing Weight is maximum weight supplied for the
landingcontact.

C. 　Maximum Landing Weight is minimum weight provided for the landing
touchdown.