A、 用一条水平的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除, 该黑线只与印刷品的修改部分相对应。
B、 用一条竖直的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
C、 用一条横向的白线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
答案:B
A、 用一条水平的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除, 该黑线只与印刷品的修改部分相对应。
B、 用一条竖直的黑线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
C、 用一条横向的白线沿着页面外侧(或两栏页面上与边槽相对的列侧)来标识修
订、添加和删除,该黑线只与印刷品的修改部分相对应。
答案:B
A. 一个燃油马达安装在区域 10
B. 一个燃油马达在区域 10 运转
C. 一个燃油泵安装在区域 10
A. Send the results of the audit to the quality department
B. Tell the quality department about the results of the analysis
C. Let the quality department know the results of audit
A. The Handbook producer should average the material within paragraphs in
a way he considers to be most informative to the kind of pilot experienced
to use the Handbook.
B. The Handbook manufacturer should arrange the material within paragraphs
in a sense he considers to be most useful to the kind of pilot anticipated
to use the Handbook.
C. The Handbook operator should arrange the document within paragraphs in
a manner he considers to be most incentive to the kind of pilot expected
to use the Handbook.
A. 在选择检查时间或对疲劳应力的影响方面,没有理性的考虑造成腐蚀的原因。
B. (从基本原理角度)选择检查时间或对疲劳应力的影响方面,没有考虑造成腐
蚀的原因
C. 在选择检查时间或对疲劳应力的影响方面,没有(从基本原理角度)考虑腐
蚀的影响。
A. GOES
B. LEAVES
C. GETS
A. 液位计带有一个 80 立方厘米的透明腔体。
B. 液位计带有一个 80 立方厘米的转换腔体。
C. 液位计带有一个 80 立方厘米的次级腔体。
A. the lower seal comes into view when you pull the lower bearing down.
B. The lower seal shows as the lower bearing is pulled down.
C. The lower seal appears as the up bearing is pulled down.
A. If there is hum from the loudspeaker,don't adjust the potentiometer.
B. Adjust the potentiometer unless hear a hum from the loudspeaker.
C. Adjust the potentiometer until the loudspeaker no longer hums.
A. 内容
B. 恒定
C. 包含
A. CHANGE
B. CONVERT
C. TURN