A、 In flight,Flight Idle Power required for the engine to operate at slowly
speed is an important condition to ensure good engine operation and
airplane handing characteristics.
B、 Flight Idle Power is the power required for an engine to operate at
a minimum speed during flight to ensure satisfactory engine operation and
aircraft handing characteristics.
C、 In flight,good engine operation and aircraft handing characteristics
are guaranteed to provide the engine with Flight Idle Power needed to
operate at the lowest speed .
答案:B
A、 In flight,Flight Idle Power required for the engine to operate at slowly
speed is an important condition to ensure good engine operation and
airplane handing characteristics.
B、 Flight Idle Power is the power required for an engine to operate at
a minimum speed during flight to ensure satisfactory engine operation and
aircraft handing characteristics.
C、 In flight,good engine operation and aircraft handing characteristics
are guaranteed to provide the engine with Flight Idle Power needed to
operate at the lowest speed .
答案:B
A. 副翼回到中立位后,确保其与襟翼齐平。
B. 扰流板回到原位后,保证和襟翼对齐。
C. 在副翼返回中心之后,保证它们和襟翼相连。
A. 这个手册需要花费两个小时读完。
B. 做这个程序需要两个小时。
C. 两个小时必须完成这个程序。
A. 定位器与跑道中心线对齐,下滑道与跑道出口成一定角度
B. 航道与跑道中心线对齐。下滑道与跑道入口成恒定角度。
C. 航道与跑道中心线平行,下滑道与跑道出口成恒定角度。
A. Make sure that the diameter of the hole is less than the specified value.
B. Make sure that the diameter of the hole is more than the specified value.
C. Make sure that the radius of the opening is less than the specified
value.
A. 对于使用时间长的飞机,大修时分解进行检查,以协助选择检查项目。
B. 为了大修而拆卸的长时间使用飞机,应被检查以协助选择检查项目
C. 为了协助选择检查项目,应检查并拆卸使用时间长的飞机进行大修
A. STAY
B. STILL
C. LEAVE
A. 为了便于参考,这些分隔标签应交错放置
B. 为了简单参考,这些分隔标签应平行放置
C. 为了便于参考,这些分隔标签应乱序放置
A. 垂直列表使复杂的长句子更容易阅读和理解。
B. 垂直方向上的清单使复杂的长句子更容易读取和理解。
C. 长的复合句可以通过垂直列表简化以进行阅读和理解。
A. Both master schematic diagrams and system function of complex systems
should be for simplicity of presentation and understandability.
B. Complex systems should be divided into system function but not overall
master schematic diagrams for homeliness and a better understanding of
presentation.
C. For simplicity of presentation and understandability, complex systems
should be divided into either system function or overall master schematic
diagrams.
A. ACCESS
B. NEAR
C. CLOSE