112.Move the lever rearward.

A. 　Apply a load to the panel until it moves into position with a click.

B. 　Bear down on the panel until it moves into place with a click.

C. 　Use a load to the panel until it moves into position with a click.

A. 　TWINKLE

B. 　FLASH

C. 　SPARKLE

A. 　The wind speeds recorded as alterables on the diagrams of this Handbook
shall be understood as the headwind or tailwind components of the reported
wind .

B. 　The wind velocities recorded as variables on the charts of this Handbook
are goning to be understood as the headwind or tailwind constituents of
the reported wind .

C. 　The wind velocities recorded as immutables on the charts of this

A. 　飞机维修手册(或持续适航指令)是包含飞机持续适航方案的主要文件,CAP
对其进行补充。

B. 　飞机维修手册(或持续适航指令)是包含飞机持续适航方案的补充文件,CAP
是主要文件。

C. 　飞机维修手册(或持续适航指令)是包含飞机持续适航方案的唯一文件,CAP
对其进行扩展。

A. 　图表的布置应使系统的流程能够最便于进行追踪。

B. 　图表的设置应使系统的流程能以最省事的流程进行查找。

C. 　图文的设计应使系统的流程能够最便于更改。

A. 　BYPASS

B. 　BYPASSED

C. 　BYPASSES

A. 　as you do the valve test, ensure that there is no leak.

B. 　while you do each step of the valve test,ensure that there is no leak.

C. 　while you do each step of the valve test, make sure that there is no
leakage.

A. 　irworthiness Programs prepared to enhance safety.

B. 　、Standardization will enhance safety though uniform interpretation of
inspection requirements contained in

C. 　、Standardization will in accord with this Specification through uniform
interpretation of inspection requirements contained in Continuing

A. 　在设计理论图时,必须有必要在使理论图易于说明的细节与易于阅读和理解
的必要简化直接做成选择。

B. 　在设计简图时,可能需要在使简图一目了然所有细节和易于阅读和理解所需
要的简单基础之间做出让步。

C. 　在设计示意图时,可能有必要在使示意图易于说明的必要细节与易于阅读和
理解的必要简化之间做出折衷。

A. 　ABC has determined the varied mission the airplanes performed, type
of care given, and age and utilization rates because providing additional
inspection requirement is prerequisite to further ensure that the
airplane can continue to carry the design loads it was initially certified
for based on inspections, tests, and analyses.

B. 　ABC has determined that providing additional inspection requirements
is prerequisite to further ensure that the airplanes can continue to carry
the design loads it was initially certified for based on inspections,
tests, and analyses because of the varied mission the airplanes performed,
type of care given, and age and utilization rates.

C. 　To further ensure that the airplanes can continue to carry the design
loads it was initially certified for, owing to the diversified mission
the airplanes performed, type of care given, and age and utilization rates,