A、 PRODUCE
B、 GENERATE
C、 SUPPLY
答案:C
A、 PRODUCE
B、 GENERATE
C、 SUPPLY
答案:C
A. THINK
B. SUSPECT
C. CONSIDER
A. Secondly, it is a guide to industry standardization of proven concepts
to be presented in a form most useful to pilots.
B. Basically, it is a guide to industry standardization of provided
concepts to be presented in a form most useful to pilots.
C. Mainly, it is a guide to industry standardization of proven concepts
to be presented in a form most useful to pilots.
A. ambient Air Temperature is the static free air temperature attained
from inflight temperature indications or surface meteorological sources,
adjusted for instrument error and compressibility effects.
B. Outside Air Temperature is the free air electrostatic temperature,
contained neither from inflight temperature indications nor ground
meteorological and compressibility effects.
C. Outside Air Temperature is the free air static temperature, obtained
either from inflight temperature indications or ground meteorological
sources, adjusted for instrument error and compressibility effects.
A. to arrive at the incorrect value, set the switch to position 2.
B. to get the correct value, set the switch to position 2.
C. to get the incorrect value, set the switch to position 2.
A. You can use electric motors to drive fuel and hydraulic pumps or to
drive a valve to the commanded position in the fuel,hydraulic or air
conditioning system or to move doors and cargo containers.
B. Electric motor can drive fuel and hydraulic pumps or drive a valve to
the commanded position in the fuel,hydraulic or air conditioning system
or move mechanical parts like doors and cargo containers to produce
mechanical power.
C. Electric motor produce mechanical power and their main functions are
to drive fuel and hydraulic pumps,to drive a valve to the commanded
position and to move mechanical parts like doors and cargo containers.
A. 如果不正确跟进操作程序、检查、修理或维护程序,可能导致人员受伤。
B. 如果没有紧跟操作程序、检查、修理或维护程序,可能导致人员伤亡。
C. 如果不正确遵循操作程序、检查、修理或维护程序,可能导致人员伤亡。
A. 控制单元安装在驾驶室后部。
B. 控制组件安装在驾驶舱的后部。
C. 控制组件安装在飞行舱之后。
A. 封面上包含的信息将由制造商自行决定
B. 封面左侧上包含的信息将由制造商自行选择的
C. 封面左侧上包含的信息将由制造商自行设计的
A. 拆/装、拆卸/安装部分应清楚说明拆卸和安装部件或组件所需的步骤顺序,
以及遵循的预防事项。
B. 拆装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件所需的步骤顺序,
以及要遵守的预防措施。
C. 拆/装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件以及遵循的预
防事项所需的步骤顺序。
A. 用螺母将面板固定在支架上
B. 用螺栓将面板连接到结构上
C. 用螺栓将面板固定在支架上