A、 手册中所示的测量单位必须准确。
B、 手册中给出的测量单位必须一致。
C、 手册中的测量单位必须写明。
答案：B
A、 手册中所示的测量单位必须准确。
B、 手册中给出的测量单位必须一致。
C、 手册中的测量单位必须写明。
答案：B
A. PRODUCE
B. GENERATE
C. SUPPLY
A. An appropriate caution or note shall be contained in each Handbook to
inform the operator that a current Handbook is required to be in the
airplane during flight and that it is the operator's duty to keep the
B. A current Handbook that an appropriate warning or note shall be obtained
in each Handbook to inform the operator is required to be in the airplane
during flight and that it is the operator's responsibility to retain the
C. A suitable warning or note shall be involved in each Handbook to inform
the operator that a current Handbook is required to be in the airplane
during flight and that it is the operator's responsibility to maintain
the Handbook in a current status .
A. The wind speeds recorded as alterables on the diagrams of this Handbook
shall be understood as the headwind or tailwind components of the reported
wind .
B. The wind velocities recorded as variables on the charts of this Handbook
are goning to be understood as the headwind or tailwind constituents of
the reported wind .
C. The wind velocities recorded as immutables on the charts of this
A. does not permitted to
B. not permitted to do
C. permit to do
A. OTHER
B. OTHERWISE
C. ORIGINAL
A. Make sure that the diameter of the hole is less than the specified value.
B. Make sure that the diameter of the hole is more than the specified value.
C. Make sure that the radius of the opening is less than the specified
value.
A. You may use alerts and cautions to emphasize some important places.
B. The important parts must be highlighted by using the warnings,cautions
and notes.
C. Warning,cautions and notes may be used to highlight or emphasize
important points.
A. 当反推放出时,所有的人员远离飞机。
B. 当发动机工作时,所有的人员远离飞机。
C. 当油门工作时,所有的人员远离飞机。
A. 转动凸轮以松开管路
B. 转动卡以使管路自由移动
C. 转动卡箍以松开管路
A. 包括折页和章节开头页,所有页面均应双面打印。
B. 包括折页和章节开头,所有页面均应单面打印。
C. 除了折页和章节开头页,所有页面均应双面打印。
