A、 在检查单之后可以增加程序,以便飞行员更好地理解简易检查单中采取动作
的原因。
B、 检查单可能需要增加额外信息,以便飞行员更好的理解检查单中的措施。
C、 检查单后面可能还有附加信息,以便飞行员更好的理解怎样实施检查单。
答案：A
A、 在检查单之后可以增加程序,以便飞行员更好地理解简易检查单中采取动作
的原因。
B、 检查单可能需要增加额外信息,以便飞行员更好的理解检查单中的措施。
C、 检查单后面可能还有附加信息,以便飞行员更好的理解怎样实施检查单。
答案：A
A. CHANGE
B. CONVERT
C. TURN
A. Disassemble the bypass valve and the dump valve together.
B. Decompose the bypass valve and the dump valve at the same time.
C. Disassemble the bypass valve and the dump valve at the same time.
A. to arrive at the incorrect value, set the switch to position 2.
B. to get the correct value, set the switch to position 2.
C. to get the incorrect value, set the switch to position 2.
A. Maneuvering Speed is the maximum speed what required of full uncommitted
aerodynamic control will not exceed the airplane.
B. Maneuvering Speed is the largest speed that the aerodynamic application
by the full available control will not cause the aircraft overexert.
C. Maneuvering Speed is the maximum speed at which application of full
available aerodynamic control will not overstress the airplane.
A. The Handbook shall include information concerning the procedures or
behaviors that need to be taken by the maintenance of the airplane to
maintain the Handbook in a current conditions.
B. The Handbook shall contain information concerning the procedures or
measures that need to be taken by the manufacturer of the airplane to hold
the Handbook in a current status.
C. The Handbook shall contain information concerning the procedures or
actions that need to be taken by the operator of the airplane to maintain
the Handbook in a current status.
A. INCLUDE
B. INCLUDES
C. INCLUDING
A. 封面上包含的信息将由制造商自行决定
B. 封面左侧上包含的信息将由制造商自行选择的
C. 封面左侧上包含的信息将由制造商自行设计的
A. 控制单元安装在驾驶室后部。
B. 控制组件安装在驾驶舱的后部。
C. 控制组件安装在飞行舱之后。
A. the pump did not operate because the shaft was broken.
B. The pump did not operate does the shaft was broken.
C. the pump did not work as the shaft was broken.
A. 本规范旨在为最初以 12500 磅或以下(或 5700 千克)最大起飞重量认证的
所有类型通用航空飞机提供手册编制指南。
B. 本规范的制定是为手册编写提供规范性制导,用于 12500 磅(或 5700 千克)
或以下最大起飞重量的所有类型飞机。
C. 本规范规定了以起始为 12500 磅或以下(或 5700 千克)最大起飞重量认证
的所有类型通用航空飞机提供手指编制指导。
