A、 当反推放出时,所有的人员远离飞机。
B、 当发动机工作时,所有的人员远离飞机。
C、 当油门工作时,所有的人员远离飞机。
答案:A
A、 当反推放出时,所有的人员远离飞机。
B、 当发动机工作时,所有的人员远离飞机。
C、 当油门工作时,所有的人员远离飞机。
答案:A
A. 拆/装、拆卸/安装部分应清楚说明拆卸和安装部件或组件所需的步骤顺序,以
及遵循的预防事项。
B. 拆装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件所需的步骤顺序,
以及要遵守的预防措施。
C. 拆/装、拆卸/安装部分应清楚说明拆卸和重新安装部件或组件以及遵循的预防
事项所需的步骤顺序。
A. the lower seal comes into view when you pull the lower bearing down.
B. The lower seal shows as the lower bearing is pulled down.
C. The lower seal appears as the up bearing is pulled down.
A. The wind speeds recorded as alterables on the diagrams of this Handbook
shall be understood as the headwind or tailwind components of the reported
wind .
B. The wind velocities recorded as variables on the charts of this Handbook
are goning to be understood as the headwind or tailwind constituents of
the reported wind .
C. The wind velocities recorded as immutables on the charts of this
A. GO INTO
B. SPILLS
C. FLOW
A. 如果大型插图水平放置,索引批注和标题最好是径向放置。
B. 尽管大型插图水平放置,索引批注和标题最好是垂直放置。
C. 因为大型插图横向放置,索引批注和标题最好是垂直放置。
A. 如果有编号,它们无需遵循本规范中的编号而按流程编号,为了避免因规范
材料不适用飞机构型而产生的“间隙”。
B. 如果有编号,它们无需遵循本规范中的编号而按特定的方法编号,以避免因
规范材料不符合飞机型号而产生的“差距”。
C. 如果有编号,它们应按顺序编号,无需遵循本规范中的编号,以避免因规范
内容不适用飞机型号而产生的“间隙”。
A. 包括本手册的简介部分在内,每一章都应标上一个分隔符标签
B. 包括本手册的简介部分在内,每一章都应标上一个塑料分隔标签
C. 包括本手册的简介部分在内,每一章都应标记一个塑料分栏标签
A. It is standard to do the procedure in this service bulletin.
B. It is necessary to do the procedure in this service bulletin.
C. It is mandatory to do the procedure in this service bulletin.
A. The gearbox is installed behind the pneumatic motor.
B. The bump is installed behind the hydraulic motor.
C. The bump is installed behind the pneumatic turbine.
A. 在修改图示的情况下,可以使用黑色横线或者黑色手势来引起读者对于修改部
分的注意。
B. 在更换描述的情况下,可以使用黑色竖线或者黑色手势来引起读者对于修改部
分的注意。
C. 在修改图示的情况下,可以使用黑色竖线或者黑色手势来引起读者对于修改部
分的注意。