37 、 Pilots Operating Handbooks are prepared in accordance with "GAMA Specification No.1"
飞行员操作手册按照“GAMA 规范 1 号”编写

A. 　 Worn components should be replaced even if the damage is below the maximum limits.

B. 　 Replace components that are worn beyond their maximum limits.

C. 　 The maximum limits can not be exceeded when repairing the worn components.

A. 　: When some new kind of situation occurs, the operator should communicate openly with the
manufacturer The manufacturer should supply the operator solid assistance

C. 　: When something new happens, open interconnection should exist between manufacturer and the
operator. The opera tor should report to the manufacturer to obtain effective discount.

A. 　试验结果表明,需要实施故障识别程序。

B. 　如果测试没有给出满意的结果,执行故障隔离程序。

C. 　如果测试结果不满足,启动故障探测程序。

A. 　 使用通用工具密封端口

B. 　使用指定的工具封严开口

C. 　端口可以使用特殊的工具封严

A. 　 A warning is an operating procedure, inspection, repair or maintenance practice, which if not correctly
followed, could result in personal injury, or loss of life.

B. 　 The warming information that contains operational check,inspection, repair or maintenance tasks shall be
properly followed, or injury to persons or loss of life can be caused.

C. 　 Warning information contains operating procedure, inspection, repair or maintenance practice that will
cause injury to persons or loss of life.

A. 　附录应显示系统数据所在的章或子章。

B. 　目录应显示章或子章以及系统路径所在的位置。

C. 　索引应显示系统电路所在的章或子章。

A. 　 the function of the portable water system is to store and send drinking water to the passenger

B. 　 The potable water system must keep and transfer the water to the toilet for washing only

C. 　 The purpose of the drinking water system is to store and deliver the water for drinking

A. 　 Decide which hydraulic system you will pressurize

B. 　 The pressurized hydraulic system is the best

C. 　 Check the hydraulic system that you will pressurize.

A. 　 Obey the safety precautions when you do work with high voltages.

B. 　 When working with high resistances, you should follow the safety precautions.

C. 　 The safety precautions are optional in an environment with high voltages.

A. 　将 O 形环安装在锥形轴承的内部凹槽中

B. 　将 O 形环安装在圆柱形轴承的内部凹槽中

C. 　将 O 形环安装在球形轴承的内部凹槽中