A、 When the movement of input rod is ranged from 5 to10 mm, measure the piston retraction.
B、 4 When the input lever is between 5 and 10 mm, measure the piston extension.
C、 When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.
答案：B
A、 When the movement of input rod is ranged from 5 to10 mm, measure the piston retraction.
B、 4 When the input lever is between 5 and 10 mm, measure the piston extension.
C、 When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.
答案：B
A. Get medical aid immediately unless you get the solvent in your eyes
B. Get medical aid immediately provided you get the compound in your eyes.
A. 在释压测试期间,不得开启舱门。
B. 在增压测式期间,确保舱门关闭。
C. 进行水压测试时,确保舱门关闭。
A. 为了获得正确的间隙,需要增加特殊的垫片。
B. 为了获得正确的间隙,按需增加特殊的垫片。
C. 要获得正确的间隙,需要增加特定的垫片。
A. The flight deck is located between the pressure/dome/and the front passenger door, and it is above the
floor.
B. Cockpit is on the floor panel and bet ween/the/pressure dome and the rear passenger partition.
C. Flight compartment is above the floor and between/the forward passenger partition and the forward
pressure dome.
A. The manufacturer may offer procedures to provide feedback on unairworthy conditions that were
discovered to be complied.
B. In order to discover any unairworthy conditions when compiling, the manufacturer shall comply with
certain procedures.
C. The manufacturer may set up 'procedures to feedback unairworthy conditions discovered when
complying.
A. 从仪表前侧断开钢索。
B. 断开仪器后方的管线人
C. 从仪器后侧断开电缆
A. 检查盒子里有无丢失的东西。
B. 检查盒子里内有无遗漏物品。
C. 为了找到丢失的东西需要检查盒子
A. The lower seal appears as the lower bearing is pulled down.
B. You can see the lower seal before pulling the lower bearing down.
C. Only after you pull the lower seal down can you see the lower bearing.
A. 用黑色字体在页面外侧对改版、补充和删除进行说明,对应于已经更改的部分打印内容。
B. 应在书页外侧以垂直黑线标记修订、增加和删除之处,仅对应于印刷件中已更改的内容。
C. 对于经过修订和增删的文字,沿书页外侧用粗黑直线加以标识,并仅打印修改。内容部分。
A. Such tests or checks will be completed according to the conditions.
B. Such tests or checks will be very complex according to the conditions
C. Such tests or checks will be different in complexity according to the conditions
