282、 Set the applicable L PACK switch or the R PACK switch, on the P5-10 air conditioning panel, to the AUTO position.
将 P5-10 空调面板上对应的 L PACK 或 R PACK 开关设置为“AUTO”位置。

A. 　Schematics must be readable to a normal visioned person, so legends, symbols devices, codes, etc.
,
should be of sufficient size. The schematic diagram should be designed to turn over the page when the
content is necessary.

B. 　The schematic diagram must be of sufficient size that legends, symbols, devices, codes etc., are readable by
persons with normal vision. Turn-page schematic diagram shall be avoided to the extent practical.

C. 　 The schematics symbols, devices, codes etc. must be 1egib1e, so peop1ewith normal vision should avoid
turning the schematic pages as much as possible

A. 　这些安全措施是在维修区工作的最低要求

B. 　这些安全警告满足维修区工作的全部要求

C. 　这些安全提示有必要作为维修区工作要求

A. 　 The selection of data by manual producers which are included in this section shall be restrained by the
concepts contained in the preface of this specification,

B. 　 The selection of data by manual producers included in this section shall be governed by the concepts
contained in the preamble to this specification.

C. 　 In his selection, the producer's choice of data should be bound by concepts contained in the preamble of
this specification.

A. 　 Many electrical power components are in the EE compartment.

B. 　 Many electrical power components are in the cargo compartment.

A. 　 Do the tightening procedure.

B. 　 Do the loosening procedure.

C. 　 Do the strengthening procedure.

A. 　 Turn the cap counterclockwise.

B. 　 Turn the cap clockwise.

C. 　 Rotate the cap clockwise.

A. 　 This document shall clearly states the minimum size crack you may discover in a crack inspection. If no
minimum is defined, it shall have a statement that that the same effect.

B. 　This document shall specify the minimum allowed crack size expected to be discovered for a crack
inspection or, if no minimum is defined, an equally valid standard.

A. 　检查单可能也包括关于飞机操作的补充信息

B. 　检查单可能也提供与飞机操作相关的信息

C. 　检查单也确认了一些关于飞机操作的辅助信息

A. 　使用符号代表电磁活门,显示该活门是否是弹簧加载到开位或关位。

B. 　应针对电磁活门标明注意事项,说明该活门应该弹簧加载到开位还是关位。

C. 　电磁活门应标有符号,表明该活门是弹簧加载到开位还是关位。

A. 　 These must be shown on the wiring diagram under some specific conditions and wires are color coded.

B. 　 Wires are coded in color in certain condition, and these should be marked on the wiring diagram.

C. 　 In some cases, wires are color coded, and these should be indicated on the wiring diagram.