A、 After 10-flight cycles or 25 flight hours, which comes first the rod end bearing shall be discarded if its wear is greater than 0.010 inch of diameter.
B、 lf the rod end bearing wear is greater than 0.010 inch in radial play, reject it within newt 10 flight cycles or 25 flight hours whichever comes first.
C、 Destroy the rod end bearing during 10 flight cycles or 2 flight hours when its wear is more than 0.010 inch of its radius, whichever comes first.
答案：空
A、 After 10-flight cycles or 25 flight hours, which comes first the rod end bearing shall be discarded if its wear is greater than 0.010 inch of diameter.
B、 lf the rod end bearing wear is greater than 0.010 inch in radial play, reject it within newt 10 flight cycles or 25 flight hours whichever comes first.
C、 Destroy the rod end bearing during 10 flight cycles or 2 flight hours when its wear is more than 0.010 inch of its radius, whichever comes first.
答案：空
A. 对 2 号引擎进行排故。
B. 对 2 号发动机进行大修。
C. 对 2 号发动机进行校验。
A. C The manufacturer shall prepare all text in either one or two columns with justification at his own
discretion , but two columns are preferable for readability.
B. Manufacturers shall prepare all text both in one and two columns separately; however, two columns are
better for reading.
C. According to the manufacturer explanations all text shall be prepared in one or two columns,however,
two columns have better visual effect.
A. The flight deck is located between the pressure/dome/and the front passenger door, and it is above the
floor.
B. Cockpit is on the floor panel and bet ween/the/pressure dome and the rear passenger partition.
C. Flight compartment is above the floor and between/the forward passenger partition and the forward
pressure dome.
A. 一个关于序号/组件号(或具他识别信息)的列表在右边页面的相应的栏目中
B. 页面右侧相应的栏目中列出了对应的序列号/组件号(或其他识别信息)
C. 一组对应序列号/组件号(或其他识别信息)的栏目应显示在正确的页面上
A. 每个乘客的座位上的客舱娱乐系统可以传输音频和图像,也可以被连接到乘客系统的喇叭上。
B. 视频娱乐的图像部分被传送到图像娱乐系统所选频道上的每个乘客的座位上,也可以被连接到乘客系统的
扬声器上
C. 视频娱乐的音频部分被传送到音频娱乐系统中所选频道上的每个乘客的座位上,也可以被连接到乘客系统
的扬声器上。
A. This section tells how to identify a fault by checking flight instruments.
B. This section tells parameters on flight instruments.
C. This section tells how to find a failure of flight instruments.
A. For line maintenance carried out at a line station of an organization which is located outside the
A. other information or messages e.g report to the manufacturer about the cracks existed" is included here
B. Additional
contained here
C. You can find the following instructions here for example "report any scratches to the OEM”
A. These must be shown on the wiring diagram under some specific conditions and wires are color coded.
B. Wires are coded in color in certain condition, and these should be marked on the wiring diagram.
C. In some cases, wires are color coded, and these should be indicated on the wiring diagram.
A. Be careful not to get acid on your skin.
B. Do not get acid on your skin
C. You must be careful to get acid on your skin.
