A、 lf the indication is not correct, do the test again.
B、 lf the indication is not incorrect; you should do the next test.
C、 Do the test a second time if the indication is correct.
答案：A
A、 lf the indication is not correct, do the test again.
B、 lf the indication is not incorrect; you should do the next test.
C、 Do the test a second time if the indication is correct.
答案：A
A. 如果没有明显迹象表明紧固件松动,在紧固件头部和相邻材料上标记一条红线
B. 如果紧固件松动的迹象不清晰,则跨过紧固件头部和相邻材料上标记一条红线
C. 如果没有清晰地显示出紧固件松动,则在紧固件头部和相邻材料上方标记一条红线
A. When the movement of input rod is ranged from 5 to10 mm, measure the piston retraction.
B. 4 When the input lever is between 5 and 10 mm, measure the piston extension.
C. When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.
A. This Specification was issued by the General Aviation Manufacturers Association.
B. This Specification was revised by the General Aviation Manufacturers Association.
C. This Specification was compiled by the General Aviation Manufacturers Association.
A. 给计算机做一个备份,在常规时期。
B. 定期备份计算机。
c、定期清理计算机。
A. In designing schematic diagrams, it may be necessary to combine two aspects、 specification necessary to
make the diagram clear, And the simplicity essential for ease of reading and understanding.
B. In designing schematic diagrams, it may be necessary to comprehend two aspects、 detection necessary to
make the diagram self-contained, And the simplification essential for ease of reading and understanding.
C. In designing schematic diagrams, it may be necessary to compromise two aspects、 detail necessary to
make the diagram self-explanatory、 And the simplicity essential for ease of reading and understanding
A. 在左边空白处用黑色垂直线或用“手形指示”来标记确定插图的修改部分。
B. 用与修改部分相对的左边空白处的黑色垂直线或用“手形指示”来确定插图的修改。
C. 用左边空白处的黑色水平方向直线或用“手形指示”来确定插图的修改。
A. Briefly describe and, explain principle of operation of any new kinds of flight instruments.
B. Briefly introduce the operation principal of any new kinds of flight apparatus
C. Briefly describe and explain the operation principle of any new kinds of flight displays.
A. To open the containers for these materials, sittable tools must be used.
B. The appropriate tools should be selected to open the materials; the containers is inside the materials.
C. The inappropriate tools should be selected to open the containers; the containers is made in the materials.
A. 列出机械员工其箱内工作所需的工具、设备和器材
B. 列出机械员工具箱内通常不包含的工作所需的工具、设备和器材
C. 将机械员日常工作中工其箱内所需的工具,设备和器材列出来
A. After 10-flight cycles or 25 flight hours, which comes first the rod end bearing shall be discarded if its wear is greater than 0.010 inch of diameter.
B. lf the rod end bearing wear is greater than 0.010 inch in radial play, reject it within newt 10 flight cycles or 25 flight hours whichever comes first.
C. Destroy the rod end bearing during 10 flight cycles or 2 flight hours when its wear is more than 0.010 inch of its radius, whichever comes first.
