A、 The distance between the edge of the panels and the partition must be less than 0.05 mm.
B、 The distance between the edge of the panel and the partition must be equal to 0.05mm
C、 The distance between the edge of the panel and the partition must be 0.05 mm or less.
答案：C
A、 The distance between the edge of the panels and the partition must be less than 0.05 mm.
B、 The distance between the edge of the panel and the partition must be equal to 0.05mm
C、 The distance between the edge of the panel and the partition must be 0.05 mm or less.
答案：C
A. The STE dictionary gives an approved alternative that has a different part of speech.
B. The STE dictionary gives an approving alternative word has a different word class.
C. The English dictionary gives an approved alternative word with a different part of speech.
A. Solenoid valves shall be shown with a notation. The notation indicates the spring is loaded by the valve to
the open or closed position
B. Solenoid valves shall be shown with a symbol. The valve indicates whether the valve is spring-loaded to
the open or closed position.
C. Solenoid valves shall be shown with a mark. The mark indicates whether the valve is spring-loaded to the
open or closed position
A. 如果维护消息未在"电流状态"中显示,则出现了连续性故障
B. 如果维护信息未在"当前状态中显示,则出现了间歇性故
C. 如果维护消息未在"当前状态"中显示,则出现了次级故障。
A. 松开卡箍,将螺钉固定到支架上
B. 松开螺钉,将卡箍固定到支架上。
C. 松开将卡箍固定到支架上的螺钉。
A. 非授权人员禁止进入该区域。
B. 只有经过批准的人才可以呆在这个地区
C. 未经批准人员只能短时间在此区域停留。
A. The operational test of HFS-900D transceivers is internal functions check of the HF transceiver and it is a
B. The BITE test for the HFS-900D transceivers is the operation test that does the inner check of the HF
transceiver.
C. The check of the internal functions of the HF transceiver is a BITE test related to HFS-900Dtransceivers.
A. 本规范涉及 FAA 的各种调节。
B. 本规范参考了各种 FAA 条例。
C. 本规范称作 FAA 的各种规章。
A. 当飞机离地时,最小的千斤项的高度必须小于接头和地面之间的距离。
B. 给飞机安装轮子时,千斤顶的最低闭合高度不能超过顶块和地面之间的距离。
C. 在顶起飞机之前,最小的顶升高度必须小于顶块和地面之间的距离。
A. 两个人必须要完成这个程序。
B. 此过程最多需要两个人
C. 执行这个程序需要两个人。
A. Each Chapter or Section is to begin with a specific instruction of the system and its Operation and should
be labeled "Description and Operation"
B. A general description of the system begins with each Chapter or Section and its operation and should be
labeled "Description and Operation"
C. Each Chapter or Section is to start with a general description of the system and its operation and should
be labeled" Description and Operation".
