A、 Such wires and cables should be disable of being coupled to the ground network of the aircraft electrical
system
B、 These wires and cables are capable to be connected to the aircraft electrical system ground network.
C、 The connected wires and cables shall be attached to the ground network of the aircraft electrical system.
答案：B
A、 Such wires and cables should be disable of being coupled to the ground network of the aircraft electrical
system
B、 These wires and cables are capable to be connected to the aircraft electrical system ground network.
C、 The connected wires and cables shall be attached to the ground network of the aircraft electrical system.
答案：B
A. 曲线半径必须至少为 8mm。
B. 圆的直径必须最小为 8mm。
C. 曲线的直径必须最大为 8mm.
A. 正常俯仰控制法则基本上是负载系数的闭环控制,包括飞行发展保护。
B. 正常俯仰控制法基本上是负载厂家的闭环控制,包括飞行包线保护。
C. 正常俯仰控制法则基本上是负载系数的闭环控制,包括飞行包线保护。
A. Do not replace the self-locking nuts with plain nuts.
B. Do not use a general fastener instead of a self-locking one.
C. The general purpose nut is interchangeable with the self-locking nut.
A. If possible, always tell your reader what can show if the safety instruction is not accepted.
B. If possible, always tell your reader what can we do if the safety instruction is not understood
C. If possible, always tell your reader what can happen if the safety instruction is not followed.
A. When stop the engine, make sure that the engine decelerates to,500 RPM.
B. lf the engine decreases to 500 RPM, you must stop
C. When the engine RPM decreases 500, you’d better stop the engine.
A. 这表明你可以安装一个替代的继电器
B. 这表明你可以安装一个新的继电器
C. 这表明你可以更换一个新的继电器
A. See the graphics for information of the solenoid valves which shall contain a note indicating the position
of the valve(weather spring-loaded to its open or closed position).
B. Solenoid valves indicated on the schematic shall have a notation indicating when the valve shall be
spring-loaded to the open or closed position.
C. Solenoid valves shall be indicated on the schematic and shall include a notation indicating whether the
valve is spring-loaded to the open or closed position.
A. If the repair scheme must be changed, the approval of the design authority is hardy got.
B. If the design authority need change the repair scheme, it can get the approval.
C. If it is necessary to change the repair scheme,get the approval of the design authority.
A. 笔记本电脑有以下主要部件。
B. 笔记本电脑有以下初级部件。
C. 笔记本电脑有以下仿制部件。
A. 前言内容如下、建立 CAP 方案的原因和遵循特定 CAP 需要防止的潜在问题。CAP 与产品正常检查方案的关
系。
B. 前言包含下列信息、创建 CAP 项目的主要原因以及需要避免发生的根本问题。CAP 与产品例行检查方案的
关系。
C. 前言部分包含以下信息、创建 CAP 程序的潜在原因以及遵循 CAP 需要避免发生的根本问题。CAP 与产品常
规检查方案的关系。
