1020、 The procedures shall clearly describe the step by step operation in a logical work flow sequence as
necessary to gain access to and subsequently remove the hardware or install the hardware.

A. 　 The seat shall be lifted to leave the track locked.

B. 　 Lift the seat until it is away from the track locks.

C. 　 Eject the seat until it is isolated from the track locks.

A. 　 do the troubleshooting procedure to find the cause of the malfunction

B. 　 Do the troubleshooting procedure to look the result of the malfunction

C. 　 Find the cause of the malfunction to do the troubleshooting procedure

A. 　 For normal operations, make sure the pressure relief valve is closed. An open pressure relief valve is a
symptom of a problem in the fuel vent system.

B. 　 For normal operations, make sure the shut off relief valve works; lf you open pressure relief valve, that
indicates a problem in the fuel vent system.

C. 　 For normal operations, make sure you close the pressure relief valve. lf you leave it open a problem will be
shown in the fuel vent system.

A. 　 If a symbol or device is established for a valve or control, it shall be used for this type of unit throughout
the manual. The symbols used should be shown and identified in legend a block on the schematic diagram.

B. 　 B、 If a symbol or device has been set up to a valve or control, the equipment type will be referred, to as this
symbol or device. throughout the manual. The legend block in the diagram displays or identifies symbols or
device.

C. 　 If symbol or design is specified for a valve or control,this type of device is used throughout the section of
the manual. The symbols used can be found and identified in the legend block cof0the schematic. a

A. 　字母数字索引的主题应包含在简介中,作为定位所需电路的辅助手段。

B. 　简介中应包含按主题排列的字母索引,以帮助定位所需的电路

C. 　简介中应包含数字索引的主题,以帮助确定所需的电路。

A. 　 STEMG 记录了所有产品的变更形式及其评估。

B. 　 STEMG 记录了所有减少的变更形式及其评估。

C. 　 STEMG 对生成的所有变更表格及其评估都有记录。

A. 　 Some jobs or processes consist of several basic operations, with a number of minor steps or work items
under each.

B. 　 Some basic operations with a few small steps or work items are included in some work or processes.

C. 　 Some jobs or processes constitute a few basic operations, with several minor steps or work items under
each.

A. 　 Procedures for handling malfunctions or other abnormalities that are not emergent, or potentially
emergent may be delayed in this section.

B. 　 This Section may cover procedures for handling malfunctions or other deviations that are not of
emergency nature or involve a potential emergency that may be handled later.

C. 　 This Section may cover procedures for handling malfunctions or other deviations that are not emergent or
involve a potential emergency that may be deterred.

A. 　所有三个螺栓孔必须与燃油管匹配。

B. 　所有三个支架孔必须与燃油管对齐。

C. 　所有三个支架孔必须与然油管齐平。

A. 　 Refer to the general information in addition to engine operation limits, guidelines and special procedures.

B. 　 For general information, refer to engine operation limits; guidelines and special procedures.

C. 　 Refer to engine operation limits, guidelines and special procedures be sides general information.