1042、 This section gives you the procedures for the disassembly. 本节将为您提供拆卸的步骤。

A. 　 The revision dates need to be displayed at each revision location

B. 　 The revision date needs to be displayed in an obvious place.

C. 　 The revision date should be displayed on every revision page

A. 　 A mixture of fuel and oxygen can cause an explosion

B. 　 A mixture of fuel and nitrogen can cause an burn.

C. 　 A mixture of gas and oxygen should cause an explosion.

A. 　 Check the cut for gaps that start at its corners.

B. 　 Examine-the opening for cracks that start at its corners.

C. 　 inspect the clearance of gate from the corner.)

A. 　副翼回到中立位后,确保其与襟翼齐平

B. 　扰流板回到原位后,保证和襟翼对齐

C. 　 在副翼返回中心之后,保证它们和襟翼相连

A. 　其他信息可能会显示在封面上

B. 　其他信息可能会在盖板上留下

C. 　其他信息可能会显示在目录上

A. 　 Drill the hole until it has a radius of 8.00+/-0.003 mm.

B. 　 Ream the hole until it has a diameter of 8.00+/- 0.003 mm.

C. 　 Trim the hole until it has a width of 8.00+/--0.003 mm.

A. 　 Alternatively, you can do test B.

B. 　 Test A is irreplaceable.

C. 　 Test A is the equivalent of test B.

A. 　本手册提供了基本的控制和操作信息,这些信息描述飞机部件如何被控制,如何操作这些部件,以及所有
特殊操作程序和操作限制。

B. 　该手册提供基本控制和操作信息,描述飞机部件的生产控制工艺,包括适用的特殊生产步骤和公差值。

C. 　本手册提供了基本的控制和操作信息,描述飞机部件的控制方式和工作方式,且包括所有适用的特殊程序
和限制条件

A. 　 Each manufacturer is expected to abide by the Specification content and arrangement without any
deviation in order to reasonably achieve the objectives of this Specification (enhance safety, reduce efforts,
minimize costs).

B. 　It is mandatory that each manufacturer adhere to the Specification content and arrangement to achieve
the objectives of this Specification(enhance safety, reduce efforts, minimize costs).

C. 　 Each manufacturer,is expected to adhere ( 坚 持 ) to the Specification content and arrangement
reasonably so as to enhance safety, reduce efforts, and minimize costs which are the objectives of thisSpecification.

A. 　 A small amount of oil remains in the starter.

B. 　 Little oil is stored in the starter. if

C. 　 The starter consumes a few oil