1131、De-energize the system.

A. 　曲线半径必须至少为 8mm。

B. 　圆的直径必须最小为 8mm。

C. 　曲线的直径必须最大为 8mm.

A. 　 A reporting system, consistent with the system applied by the ABC Service organization, has been
established and included in this document.

C. 　 A reporting system, constituent with the system employed by the ABC Service organization, has been
established and accomplished in this document.

A. 　加入溶剂使油漆变得更稀薄

B. 　加入溶剂使油漆变得更稳定

C. 　在油漆里加入更多的溶剂

A. 　 Put down a face mask and protective clothing.

B. 　 Put on a face goggle and protective clothing.

C. 　 Put on a face mask and protective clothing.

A. 　找到新的故障件。

B. 　发现新的排故方法。

C. 　找到新的排故程序。

A. 　发动机控制和仪表包括下列术语或部件的定义、描述或说明。提供的这些定义、描述或说明仅是示例。那
些被用于特定手册中的应适用于另外的飞机或安装的部件。

B. 　发动机控制和仪表包括下列术语或部件的定义、描述或说明。提供的这些定义、描述或说明仅是示例。那
些在特定手册中使用的应适用于特定飞机或安装的部件。

C. 　发动机控制和仪表包括下列定义、描述或说明的术语或部件。提供的这些定义、描述或说明仅为样例。那
些指定的飞机或安装的部件在手册中有特殊的说明。

A. 　 separate document should be prepared for FAA approved airworthiness limitations which are excluded in
the primary maintenance manual.

B. 　 FAA approved airworthiness limitations shall be prepared as a separate document for inclusion in the
principal maintenance manual

C. 　 FAA approved airworthiness limitations must be contained as an integrated documentation for inclusion in
the main maintenance manual.

A. 　 contamination of the grease can cause damage to the bearing

B. 　 contamination of the oil can cause damage to the shaft

C. 　 pollution of the grease can cause damage to the axle

A. 　 Remove the safety strips and tags.

B. 　 Remove the safe clips and labels. the

A. 　 Staff must violate this procedure.as

B. 　 All persons must follow this procedure.

C. 　 Personnel must deviate from this procedure.