A、 正确
B、 错误
答案:B
A、 正确
B、 错误
答案:B
A. 本路由器到达 10.0.0.1 的出接口为 Ethernet0/0/1
B. 本路由器到达 10.0.0.1 的出接口为 Ethernet0/0/0
C. 本路由器到达 10.0.2.2 的出接口为 Ethernet0/0/0
D. 本路由器到达 10.0.2.2 的出接口为 Ethernet0/0/1
A. interface Vlanif10 Ip address 10.0.12.1 255.255.255.0 Interface GigabitEthernet 0/0/2 Port link-type trunk Port trunk pvid 10 Port trunk allow-pass vlan 10
B. interface Vlanif10 Ip address 10.0.12.1 255.255.255.0 Interface GigabitEthernet 0/0/2 Port link-type trunk Port trunk allow-pass vlan 10
C. interface Vlanif10 Ip address 10.0.12.1 255.255.255.0 Interface GigabitEthernet 0/0/2 Port link-type hybrid Port hybrid untag vlan 10
D. interface Vlanif10 Ip address 10.0.12.1 255.255.255.0 Interface GigabitEthernet 0/0/2 Port link-type access Port default vlan 10
A. 从端口收到源 MAC 地址为 5489 -9811-0b49.目的 MAC 地址为 5489-989d 1d30 的数据帧,从 Eth0/0/2 端口转发出去
B. 从端口收到源 MA
C. 当交换机重启,端口 Eth0/0/2 学习到的 MAC 地址不需要重新学习
D. 当交换机重启,端口 Eth0/0/2 学习到的 MAC 地址不需要重新学习
A. 修改用户的权限等级为 3,并保存配置
B. 修改用户视图命令的权限等级为 3,并且保存配置
C. 修改某一用户使用的 save 命令的权限等级为 3
D. 修改用户视图下的 save 命令的权限等级为 3
A. 10s
B. 40s
C. 30s
D. 20s
A. 2
B. 4
C. 5
D. 3
A. 管理员需要为主用静志路由和备用静态路由配置不同的协议优先级值
B. 管理员只需配置两个静态路由
C. 管理员需要为主用静态路由和备用静志路由配置不同的度量值。管理员只需配置两个静态路由
D. 管理员只需配置两个静态路由
A. 255. 255.255.192
B. 255. 255.255.240
C. 255. 255.255.0
D. 255. 255. 255.128
A. GE 电接口和 GE 光接口不能加入同一个 Eth-Trurnk 接口
B. Eth-Trurnk 接口不能嵌套
C. 两台设备对接时需要保证两端设备上链路聚合的模式一致
D. GE 接口和 FE 接口不能加入同一个 Eth-Trunk 接口
A. [Huawei-Seria10]ip route-statiC.0.0.0.0 0.0.0.0 0.0.0.0
B. [Huawei]ip route-statiC.0.0.0.0 0.0.0.0 192.168.1.1
C. [Huawei]ip route-statiC.0.0.0.0 0.0.0.0 0.0.0.0
D. [Huawei]ip route-statiC.0.0.0.0 255.255.255. 255 192.168.1.1