135. MAKE SURE THAT YOU CAN ( ) THE OIL LEVEL THROUGH THE SIGHT GAUGE

A. If a manufacturer chooses to provide complete inspection information to supplement the basic airplane maintenance manual,this Specification ia an example of a Continuing Airworthiness Program inspection Document ,and also, this specification establishes a standard for Continuing Airworthiness Program.

B. If a manufacturer is comprehensive inspection information to supplement the basic airplane maintenance manual ,this Specification is an example of the manual and establishes a standard for ,a Continuing Airworthiness Program inspection Document.

C. If a manufacturer wants to provide comprehensive inspection information to replace the basic airplane maintenance manual ,this Specification is an example of ,and extablishes a standard for ,a Continuing Airworthiness Program inspection Document

A. Synchronized database is available.

B. Database should be processed continuously

C. The database is already synchronizing.

A. 在大多数操作中,有对工作很重要的关键项。

B. 在大多数操作中,关键项让工作变得很完美。

C. 重要的关键项目是大多数的操作。

A. Use the torque values given in Chapter 10.

B. Base the torque values on those given in Chapter 10.

C. Base the torque values on those given in No.10.

A. The procedure of attaching the cable is different from that in detail C on Fig.4

B. See detail C on Fig.4 for another way of attaching the cable

C. You can find a different diagram of the cable in detail C on Fig.4

A. 主起落架轮舱空间宽度

B. 主起落架收放宽度

C. 主起落架轮距

A. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive print leakage when printing on both sides.

B. Use good white paper with high strength quality and of adequate weight to delete excessive show-through when printed on both sides.

C. Use white paper with good strength and of sufficient weight and substance to prevent overmuch ink show-through the paper when printed on both sides.

A. When you push the FAULT/INOP test switch, faults are emulated to do a check of the circuit to see if it has ability to detect a fault.

B. Faults are similar when doing a check of the circuit ability to correct a fault When you push the FAULT/INOP test switch.

C. When pushing the FAULT/INOP test switch, faults are shown so that we can check the circuit ability to eliminate a fault.

A. The removal of the piston is involved in the steps

B. The removal of the piston is not included in the procedure

C. The procedure eliminates the piston

A. When hydraulic system B engine drive pump pressure is under normal conditions, the hydraulic power transfer unit system supplies standby hydraulic pressure to the leading edge flaps and slats.

B. The hydraulic power transfer unit system is provide spare hydraulic pressure to the leading edge flaps and slats when hydraulic system B engine-driven pump pressure is abnormal.

C. The hydraulic power transfer unit system supplies alternate hydraulic pressure to the leading edge flaps and slats when hydraulic system B engine-driven pump pressure is below normal.