A、 the pump did not operate because the shaft was broken.
B、 The pump did not operate does the shaft was broken.
C、 the pump did not work as the shaft was broken.
答案：A
A、 the pump did not operate because the shaft was broken.
B、 The pump did not operate does the shaft was broken.
C、 the pump did not work as the shaft was broken.
答案：A
A. 修理/改装位于维修程序部分的下方,从左到右延伸。提出修理或改装说明,并可能引用另一份文档中的标准修理或在其他地方定义的特殊修理或改装,例如服务清单,服务通告等。
B. 修理/改装位于检查程序部分的下方,从左到右延伸。提出修理或改装说明,并可能引用另一份文档中的标准修理或在其他地方定义的特殊修理或改装,例如服务清单,服务通告等。
C. 修理/改装位于检查程序部分的下方,从左到右延伸。提出修理或改装说明,并可能引用另一份文档中的标准改装或在其他地方定义的特殊修理或改装,例如适航指令,服务通告等。
A. 仅B747刚引进时期,每个月就有4000页必须从手册中删减或增加进手册。
B. 在B747引进时期,仅每个月必须替换或增补的手册就有4000页以上。
C. 在B747刚引进的阶段,仅一个月就需要更换或增加约4000页到手册中。
A. FEEL
B. TREAT
C. TOUCH
A. Aluminum alloy is light and strong, so that it is widely used in aircraft manufacturing industry.
B. Aluminum alloy is light and strong, so that it is seldom used in aircraft manufacturing industry.
C. Aluminum alloy is light and strong, so that it is widely used in aircraft maintenance industry.
A. Always use test element that can cause sparks.
B. Never use test equipment which can cause cracks .
C. Do not use test equipment that can cause sparks.
A. A value of 2 mm is acceptable.
B. A value of 2 mm is permitted.
C. A value of 2 mm is required.
A. 拆卸密封胶和钝铁锹。
B. 用锋利的铲子去除密封胶。
C. 用钝刮刀刮掉密封胶。
A. 将温度计校正到华氏刻度
B. 将温度计校正到摄氏刻度
C. 将温度计拿去校验
A. When wheel is dried, clean with the compressed air.
B. When wheel is cleaned, dry with the compressed air.
C. When wheel is cleaned, dry with the impressed air.
A. 指示空速或校准空速与襟翼配置(任何襟翼配置的性能已被引用),排除最大重量时关闭油门的坡度角表示数据。
B. 数据应以指示空速和校准空速,襟翼配置(任何襟翼配置的性能已被引用) 减去最大重量时关闭油门的坡度角来表示。
C. 数据应按照指示和修正的空速与襟翼构型(已引用性能的任何襟翼位置)、坡度角和油门关闭时的重量进行显示。
