198. A written sign that identifies a quantity, operation, item, or condition

A. set the valve to fully closed position

B. set the valve to full closed position

C. set the valve to fully close position

A. The housing for the voice recorder unit has these properties: water tolerance, shock resistant and heat resistant

B. The container for the voice recorder unit has these properties: waterproof, spin resistant and heat resistant.

C. The container for the voice recorder unit has these properties: watertight, shock resistant and heat resistant.

A. Apply the talcum powder in fuel leak area.

B. Apply the kathon in fuel leak area.

C. Apply the bubble solution in fuel leak area.

A. The purpose of this portion of the test is to give direction to the job.

B. The job of test is to give direction the portion of purpose.

C. The purpose this part of the test is provide guidance for the work.

A. Scrape corrosion-protective liquid of the door connections of the landing gear earlier than the flight procedures of low water level.

B. Apply anti-corrosion fluid to the door hinges of the landing gear prior to flight operation above water at low altitude.

C. Solidify corrosion inhibitor on the door hinges of the landing gear in advance of flying across the low water.

A. The function of this special tool is to remove the shims.

B. The purpose of this special tool is to extract the bushing.

C. The function of this special tool is to extend the washer.

A. The trim control knob is installed on the control pedestal.

B. The trim control button is mounted under the control pedestal

C. You can find the trim control button on the control panel.

A. 关闭流量控制和空调组件的关断活门。

B. 关闭空调组件的流量控制和关断活门。

C. 至于空调组件,关闭流量控制和关断活门。

A. Sometimes FAA and other airworthiness authority may accept the Continuing Airworthiness Program that uses the Specification.

B. Sometimes we use the Specification to prepare a Continuing Airworthiness Program that will be accepted by non-FAA airworthiness authority.

C. Sometimes during preparing a Continuing Airworthiness Program, using the Specification may be accepted by FAA and other airworthiness authority.

A. Accumulator is often used in hydraulic system.

B. Accumulator pre-pressurize the noncompressible gas.

C. Accumulator can be used in fuel system.