222. If you are not sure if the unit is serviceable, do a standard serviceability test

A. This program describes how to identify an immediate failure and how to handle a malfunction occurred.

B. This procedure explains how to recognize impending problems and what to do if malfunctions occur.

C. How to confirm the current problems and what should you do when malfunctions occur are described in this procedure.

A. 当你拆下罩环时,小心不要损坏法兰组件

B. 当你拆下冠环扇形件时,小心不要造成法兰盘损坏

C. 拆下法兰盘时,小心不要造成冠环扇形件损坏

A. Make sure that the brightness of the reticle light rapidly drops to zero.

B. Make sure that the intensity of the reticle light lessens radically to zero.

C. Make sure that the brightness of the reticle light is gradually reduced to zero.

A. Clean the surface to make sure that the sealing is satisfactory.

B. Clean surfaces to ensure the bonding as required.

C. Clean the surface to make sure that the bond is satisfactory.

A. Nornencluture shall be similar throughout all technical data obtained by the Customer.

B. Nornencluture shall be consistent throughout alI technical data given to the Customer.

C. Nornencluture must be similar throughout all technical data provided to the Customer.

A. Peel the coating from the harness.

B. Strip the insulation from the wire.

C. Stripe the insulation from the harness.

A. 出于本规范的目的,“飞机”是指在型号合格证中指定的或由飞机制造商提供作为选择的机身和相关部件。

B. 出于本规范说明的目的,“飞机”是指在型号合格证中指定的或由飞机制造商提供作为选择的机体和相关电子部件。

C. 出于本规范的目的,“飞机”是指在适航合格证中指定的或由飞机制造商提供作为选择的机身和相关部件。

A. 使用“降低”更好,因为他描述的是压力,而不是控制压力的指示器

B. 使用“降低”更好,因为它描述的是压力,而不是监测压力的显示器

C. 使用“增加”更好,因为它描述的是压力,而不是监测压力的显示器

A. 旋转盖子直到接近干斤顶并标记“+””和“-”

B. 旋转盖子,直到你能接触到插口上“+””和“-”的标记

C. 转动盖子直到可以接近标有“+””和“-”的千斤顶。

A. lf the indication is not correct, do the test again.

B. If the indication is not incorrect, you should do the next test.

C. Do the test a second time if the indication is correct.