A、 The number of shims should be counted and recorded.
B、 It is necessary to calibrate the shims and record their numbers.
C、 Do an assessment of the number of shims needed.
答案:C
A、 The number of shims should be counted and recorded.
B、 It is necessary to calibrate the shims and record their numbers.
C、 Do an assessment of the number of shims needed.
答案:C
A. When you prepare each system/Chapter/Section, you can continue to use the page numbers previously-used.
B. Each system/Chapter/Section will use a new block of page numbers as a beginning.
C. The beginning of each system/Chapter/Section shall list a new block of page numbers.
A. 检査排水孔周围区域是否有腐蚀迹象。
B. 检査进气孔旁边区域是否有磨损迹象。
C. 检查进水孔前面区域是否有开裂迹象。
A. 这个笔记本电脑有三个备用部件。
B. 笔记本电脑有三个主要部分。
C. 这个螺钉有三个主要部分。
A. Adjust the clearance dimension between the extend proximity sensor[1A] and the target[1C] until the clearance dimension is out of range. Some of the ducts in the air distribution system are wrapped with compound material.
B. Adjust the clearance dimension between the extend proximity sensor[1A] and the target[1C] in case of the clearance dimension is out of tolerance. Some of the ducts in the air distribution system are wrapped with non-conductive material.
C. If the clearance dimension is not accurate,adjust the clearance dimension between the extend proximity sensor[1A] and the target[1C]. Some of the ducts in the air distribution system are wrapped with insulation material.
A. 门是用碳纤维增强塑料制作的。
B. 门的主要成分是碳纤维复合材料。
C. 门是由碳纤维复合塑料制成的。
A. When the airplane, engine and component manufacturers prepare Continuing Airworthiness Program Inspection Documents(which may also be called Continuing Airworthiness Programs or CAPs),they can consult this Specification as a guidance.
B. General Aviation Manufacturers Association Built up this Specification to guide the airplane, engine and component manufacturers to prepare Continuing Airworthiness Program Inspection Documents(which may also be called Continuing Airworthiness Programs or CAPs). All types of general aviation airplanes and components certified under the applicable Federal Aviation Regulations may be utilized to CAPs
C. General Aviation Manufacturers Association Built up this Specification to guide the airplane, engine and component manufacturers to prepare Continuing Airworthiness Program Inspection Documents(which may also be called Continuing Airworthiness Programs or CAPs). All types of general aviation airplanes and components certified under the applicable Federal Aviation Regulations may prepare CAPs
A. 检查盒子里有无丢失的东西。
B. 检查盒子里内有无遗漏物品。
C. 为了找到丢失的东西需要检查盒子
A. Your skin and lungs can be protected.
B. Your skin and lungs can be harmed.
C. Your skin and lungs can be harmed suddenly.
A. Landing gear position will not effect its speed;
B. The stall speed will be effected by landing gear position;
C. The stall speed is not effected by landing gear position;
A. 如果没有决定是否更换组件,请监控其湿度至少15个循环。
B. 如果决定不更换当前组件,请监控其温度至少15个循环。
C. 如果决定更换当前组件,请监控其温度至多15个循环。