264. In addition, this section may contain a comprehensive list of equipment available for installation by the manufacturer

A. 其他信息可能会显示在封面上。

B. 其他信息可能会在盖板上留下。

C. 其他信息可能会显示在目录上。

A. When the target moves to or leaves the working area of the adjacent sensor,the electronic information of the adjacent sensor will be changed.

B. When the target moves into or out of the proximity-sensor＇s actuation area, it causes a change In the proximity sensor＇s electrical property.

C. When the target enters or leaves the active region of the adjacent sensor,the electronic signal of the adjacent sensor will be changed.

A. Propeller governor is a device that adjusts the speed of the engine or propeller by increasing or decreasing the clearance of the propeller through the clearance changing mechanism on the propeller hub.

B. Propeller governor is the device that regulates the rpm of the engine or propeller by increasing or decreasing the propeller pitch, through a pitch change mechanism in the propeller hub.

C. Propeller governor is through the propeller hub of the propeller pitch changing machine, adjusts the speed of the propeller or engine by increasing or decreasing the propeller gap.

A. Examine the area that is around the drain holes for signs of corrosion.

B. Check the scavenge hole and areas around it for corrosion

C. Make sure that there＇s no corrosion around the drain hole

A. 如果燃油或润滑油喷洒,请及时清洁此区域。否则潮湿的地面会造成摔伤。

B. 如有燃油或润滑油溢出,应立即清洁此区域。潮湿的地面很危险,会致你摔倒。

C. 如果燃油或油脂有遗撒,应立即清洁此区域。否则污染的地面会致你摔倒。

A. STE规范表达内容的方式,但不规范格式(例如字体、编号等)。

B. STE管理规范的内容而不是格式(例如字号,编码等)。

C. STE被用于规范内容的形式而不是版式(例如字号,数字等)。

A. The usual control for the left pack ensures that it supplies air at a temperature. The temperature gives the occasional cooling for the flight compartment.

B. The normal control for the left pack makes sure that it supplies air. The cooling provides the necessary temperature for the flight compartment.

C. The usual control for the left pack assures that the temperature of the supplied air will provide the control cabin with the needed cooling.

A. The mechanic removed the cable roller and examined the surrounded area in detail. No other defects were found.

B. The mechanic removes the cable rotor and examines the adjacent area in detail. No other defects are noted.

C. The mechanic removed pulley and inspected the surrounding area in detail with no other defects found.

A. Correct operation of the parts does not allow dents to occur.

B. Dents that have an influence on the correct operation of the parts are not allowed.

C. Dents can prevent correct operation of the parts, so they are not permitted.

A. 在这些情况下,俯仰的机械配平和电配平系统都将不工作。

B. 当出现以下这些情况,俯仰的机械配平和电配平系统都将继续工作。

C. 在这些估况下,电配平系统都将继续工作,俯仰的机械配平不再工作。