A、 Make sure that the warning light turns on within 3 seconds.
B、 Make sure that the warning light is on for at least 3 seconds.
C、 Make sure that the warning light is turned on in no more than 3 seconds.
答案：C
A、 Make sure that the warning light turns on within 3 seconds.
B、 Make sure that the warning light is on for at least 3 seconds.
C、 Make sure that the warning light is turned on in no more than 3 seconds.
答案：C
A. 可以通过拆下保护盖来接近机械装置
B. 重新安装保护盖来接近机械装置
C. 拆下保护盖来获得机器
A. Tank unit capacitance changes with the fuel level in the tank.
B. Tank unit capacitance changes the function of the fuel level in the tank.
C. A function of the fuel level in the tank is varied by tank unit capacitance.
A. Don＇t handle the APU line, when you get close to the back fuselage
B. When you enter into the front fuselage through the access door, don＇t touch the APU line
C. Don＇t hold the APU line when you ap roach the aft fuselage through the access panel
A. Use a vertical line along the outside of the page to mark changes, additions, and deletions. Underline only the parts that was changed. Changes to the illustration are also identified with a vertical line to the left of the changed content. Every change should be dated.
B. Use a vertical line along the outside of the page to mark alterations, additions and deletions. Only changes are marked by a vertical line. Use a vertical line in the left margin of the illustration to indicate the changes. Every page should be dated for revision.
C. A vertical line along the outside of the page indicates that the content has been changed, added, and removed. Mark special parts that have been changed. Changes to the illustration can be indicated directly with a vertical line to the left of the content. Every date should be updated.
A. Three computers collect data and put them together on the data link to the display unit.
B. Three computers collect data and put them together on the data upload to the display unit
C. Three computers collect data and put them together on the data conveyed to the display unit.
A. Copies of the appropriate forms and a description of the entries to be completed are available to you from an ABC dealer or factory Customer Service Representative.
B. Copies of the proper forms and a description of the items to be completed are available to you from an ABC trader or Production Customer Service Representative.
C. The ABC trader or Production Customer Service Representative could provide the proper form copies and the description of the items to be accomplished available.
A. If the manual is loose-leaf, each page should contain the date and effective revision date when revised, or otherwise be identified as to revision status.
B. If the manual is loose-leaf, each page should contain the date and effective revision reason when revised, or otherwise be identified as to revision status.
C. If the manual is loose-leaf, each page should contain the reason and effective revision date when revised, or otherwise be identified as to revision status.
A. Replace broken clamp with new clamp with reference to standard practices and AMM and relieve rubbing with the bundle at floor bar cut at body station 360.
B. Replaced broken clamp with a new clamp diminishing rubbing at floor beam cutout at body station 360 with reference to standard practices and AMM.
C. According to the standard practices and AMM, the damaged clamp at the body station360 was replaced to eliminate the friction between the wire bundle and the cutout of the floor beam at this place.
A. This procedure gives you the disassembly process.
B. You can find the procedures for disassembling in this section.
C. The assembly process can be found in this section.
A. Attach the cable to the structurewith wire;
B. Make the wire and cable parallel to the structure;
C. Connect the wire of the cable to the structure;
