326. Interconnects to other systems should be plainly noted

A. Turn the body of the closure assist assembly with a wrench to pull the two thrust reverser doors together until you can engage the latches at the bottom of the doors.

B. Turn the main body of the closing aid with a crowfoot and pull the two throttle reverser doors together until you can connect the bolts at the bottom of the door.

C. Use a wrench to turn the main body of the closing auxiliary assembly and pull the two reverse doors together until you can attach the locks at the bottom of the door.

A. This topic shall include general information, limits, and procedures. In the maintenance manual this section shall cover subjects such as engine changes, run-up, externally mounted spare power plants, etc.

B. This section shall include general information, limits, and procedures. In the maintenance manual this section shall cover subjects such as engine changes, run-up, externally mounted spare power plants, etc.

C. This topic shall include general information, limits, and procedures. In the maintenance manual engine changes, run-up and externally mounted spare power plants are included in this section.

A. to arrive at the incorrect value, set the switch to position 2

B. to get the correct value, set the switch to position 2

C. to get the incorrect value, set the switch to position 2

A. Also includes components that are an integral part of, or fitted to the power plant cowling.

B. Includes components that are an integral part of, or fitted to the power plant cowling.

C. Components that are an integral part of, or fitted to the power plant cowling are also includes.

A. RECORD

B. COPY

C. ENTER

A. If you do not find damage during the inspection Procedure, disassemble the unit.

B. If you find damage during the inspect ion procedure, don＇t assemble the unit.

C. If you find damage during the inspection procedure, disassemble the unit.

A. Use white paper with good strength characteristics and of sufficient weight and substance to eliminate excessive show through when printed on both sides.

B. Use white paper with good strength characteristics and enough weight and substance to eliminate excessive show through when printed on both sides.

C. Use white paper with good hardness characteristics and sufficient weight and quality to eliminate perspective display during double-sided printing.

A. 原理图应包括被认为是输出源头的发电机、油箱和储液箱。

B. 原理图由被认为是输出源头的发电机、油箱和蓄压器组成。

C. 原理图应排除被认为是输出源头点的发动机、油罐和油箱。

A. If there is no contamination in the fuel sample, continue the procedure.

B. If the fuel is not polluted, go on with the procedure.

C. Obey the procedure if there is no debris in the oil sample.

A. Place an open end of a tube on each plug.

B. Put a plug on the open end of each pipe.

C. Place a plug on each pipe with an open end.